Trouble with Ports

[jason931225]

I have a server set up, i can join it fine on lan. but i cant seem to join it over wan.

I've tried many things based on information collected on general port forwarding and troubleshooting.

 

i have forwarded the port on both udp and tcp. (2300-2305, 8766, 27016)

i have disabled firewall, i have disabled windows defender. (although i dont think it should matter)

I have tried turning on/off DMZ on router.

I have my IPv4 as static IP for my server.

I am running the server with admin privs.

I have turned off my UAC.

 

 

If i run netstat -an -p UDP: (bolded are server ports)

Active Connections

 

  Proto  Local Address          Foreign Address        State

  UDP    0.0.0.0:1062           *:*

  UDP    0.0.0.0:2302           *:*

  UDP    0.0.0.0:2304           *:*

  UDP    0.0.0.0:3702           *:*

  UDP    0.0.0.0:3702           *:*

  UDP    0.0.0.0:3702           *:*

  UDP    0.0.0.0:3702           *:*

  UDP    0.0.0.0:3702           *:*

  UDP    0.0.0.0:3702           *:*

  UDP    0.0.0.0:5004           *:*

  UDP    0.0.0.0:5005           *:*

  UDP    0.0.0.0:5355           *:*

  UDP    0.0.0.0:8766           *:*

  UDP    0.0.0.0:17500          *:*

  UDP    0.0.0.0:27016          *:*

  UDP    0.0.0.0:27036          *:*

  UDP    0.0.0.0:56796          *:*

  UDP    0.0.0.0:59998          *:*

  UDP    0.0.0.0:60977          *:*

  UDP    0.0.0.0:64391          *:*

  UDP    127.0.0.1:1900         *:*

  UDP    127.0.0.1:51955        *:*

  UDP    127.0.0.1:59997        *:*

  UDP    192.168.0.50:137       *:*

  UDP    192.168.0.50:138       *:*

  UDP    192.168.0.50:1900      *:*

  UDP    192.168.0.50:59996     *:*

 

my launch param is -> (port is clearly 2302. well im able to join it over lan on port 2302 so it should be)

start /REALTIME "arma2" /min arma2oaserver.exe -port=2302 "-config=instance_11_Chernarus\config.cfg" "-cfg=instance_11_Chernarus\basic.cfg" "-profiles=instance_11_Chernarus" -name=instance_11_Chernarus "-mod=@DayZ_Epoch;@DayZ_Epoch_Server;" "-noCB" "-maxMem=2047" "-cpuCount=2" "-exThreads=1" "-noSound"

 

When i test for router/windows portforwarding policy, it says its set up correctly.

 

So.,.. i launch the game... and this is what it says when i check for the ports...

Timed out??? why.... i have the server running on port....

 

 

So i check my port again.... coz i mean why not...

yea... so i had all the ports that i could possibly want open (and not want... but im desperate)

after all, if it was not open and i had server running on the port, it would say connection refused!

 

then you might ask well... is your static ip really 192.168.0.50? YES IT IS

then i got really confused... and said Halpppp!!!!

is there anyone out there who can help me without saying 'derp did you check portforward.com?'

[Fully]

Yeah I have the same problem =(

[Defent]

Afaik, if you run on port 4444 for example, like I do. Then you have to forward 4444 in both UDP and TCP and also forward 4443 in UDP and TCP.

Individually.

 

Are you sure you've made everything correctly and made the IP public? On a side note, the ISP you're with may not allowed public IPS on private adresses. 

[jason931225]

Afaik, if you run on port 4444 for example, like I do. Then you have to forward 4444 in both UDP and TCP and also forward 4443 in UDP and TCP.

Individually.

 

Are you sure you've made everything correctly and made the IP public? On a side note, the ISP you're with may not allowed public IPS on private adresses. 

Yesh im pretty sure i have forwarded it correctly and ofc i've already called the isp to check on the ports. anyways therez no reason for isp to block udp ports.