Jump to content
  • 0

New server install won't startup, hangs on Merlin

V415

Asked by V415,

 Share

Question

V415 Newbie

V415

Posted
Posted
Hello all,

Trying to setup a brand new server, followed the 70 step instructions twice, tried in a new directory, also tried in the OA as seen below.

Any help is appreciated

Using the default napf files nothing custom yet. Using the bat file, starts and gives the following:
 3:10:26 Dedicated host created.
 3:10:27 BattlEye Server: Initialized (v1.194)
 3:10:27 Host identity created.
 
The .rpt gives:
=====================================================================
== C:\Program Files (x86)\Steam\SteamApps\common\Arma 2 Operation Arrowhead\arma2oaserver.exe
== "arma2oaserver.exe"  -port=2302 "-config=instance_24_Napf\config.cfg" "-cfg=instance_24_Napf\basic.cfg" "-profiles=instance_24_Napf" -name=instance_24_Napf "-mod=@DayZ_Epoch;@DayZ_Epoch_Server;" "-showscripterrors;"
=====================================================================
Exe timestamp: 2014/07/26 22:24:08
Current time:  2014/08/13 03:10:16


Version 1.63.125548
Item STR_EQUIP_NAME_41 listed twice
Item STR_EQUIP_DESC_41 listed twice
Updating base class ->NonStrategic, by Ca\config.bin/CfgVehicles/HouseBase/
Updating base class ->HouseBase, by Ca\config.bin/CfgVehicles/Ruins/
Updating base class ->DestructionEffects, by Ca\config.bin/CfgVehicles/House/DestructionEffects/
Updating base class ->FlagCarrierCore, by ca\ca_pmc\config.bin/CfgVehicles/FlagCarrier/
Updating base class ->VehicleMagazine, by ca\weapons\config.bin/CfgMagazines/14Rnd_FFAR/
Updating base class ->PistolCore, by ca\weapons\config.bin/cfgWeapons/Pistol/
Updating base class ->LauncherCore, by ca\weapons\config.bin/cfgWeapons/RocketPods/
Updating base class ->RocketPods, by ca\weapons\config.bin/cfgWeapons/FFARLauncher/
Updating base class ->Default, by ca\weapons\config.bin/cfgWeapons/ItemCore/
Updating base class ->Citizen, by ca\characters2\config.bin/CfgVehicles/Citizen1/
Updating base class ->SkodaBase, by ca\wheeled\config.bin/CfgVehicles/car_sedan/
Updating base class ->UH60_Base, by ca\air\config.bin/CfgVehicles/MH60S/
Updating base class ->House, by ca\misc3\config.bin/CfgVehicles/Land_Fire/
Updating base class ->House, by ca\misc3\config.bin/CfgVehicles/Land_A_tent/
Updating base class ->Camp_base, by ca\misc3\config.bin/CfgVehicles/ACamp/
Updating base class ->Car, by ca\wheeled2\lada\config.bin/CfgVehicles/Lada_base/
Updating base class StreetLamp_EP1->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_Lamp_Small_EP1/
Updating base class StreetLamp_EP1->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_Lamp_Street1_EP1/
Updating base class StreetLamp_EP1->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_Lamp_Street2_EP1/
Updating base class StreetLamp_EP1->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_Lampa_Ind_EP1/
Updating base class StreetLamp_EP1->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_PowLines_Conc2L_EP1/
Updating base class StreetLamp_BaseMediumOrange->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_lampa_sidl/
Updating base class StreetLamp_BaseMediumOrange->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_lampa_sidl_2/
Updating base class StreetLamp_BaseMediumOrange->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_lampa_sidl_3/
Updating base class StreetLamp_BaseWeakYellow->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_lampa_ind/
Updating base class StreetLamp_BaseWeakYellow->StreetLamp, by z\addons\dayz_code\config.bin/CfgNonAIVehicles/Land_lampa_ind_zebr/
Updating base class RscStandardDisplay->, by z\addons\dayz_code\config.bin/RscDisplayStart/
Updating base class RscShortcutButton->RscShortcutButtonMain, by z\addons\dayz_code\config.bin/RscDisplayMain/controls/CA_Exit/
Updating base class RscText->, by z\addons\dayz_code\config.bin/RscTitles/Default/
Updating base class zZombie_Base->zZombie_new_Base, by z\addons\dayz_code\config.bin/CfgVehicles/z_villager1/
Updating base class zZombie_Base->zZombie_new_Base, by z\addons\dayz_code\config.bin/CfgVehicles/z_worker1/
Updating base class Soldier_Crew_PMC->Soldier_Bodyguard_M4_PMC, by z\addons\dayz_code\config.bin/CfgVehicles/SurvivorW2_DZ/
Updating base class HighCommand->Logic, by z\addons\dayz_code\config.bin/CfgVehicles/HighCommandSubordinate/
Updating base class ->ViewOptics, by z\addons\dayz_code\config.bin/CfgVehicles/Mi17_base/Turrets/MainTurret/ViewOptics/
Updating base class HouseBase->, by z\addons\dayz_code\config.bin/CfgVehicles/House/
Updating base class NonStrategic->BuiltItems, by z\addons\dayz_code\config.bin/CfgVehicles/Fort_RazorWire/
Updating base class MeleeHatchet->MeleeWeapon, by z\addons\dayz_code\config.bin/CfgWeapons/MeleeCrowbar/
Updating base class VehicleMagazine->CA_Magazine, by z\addons\dayz_code\config.bin/CfgMagazines/29Rnd_30mm_AGS30/
Updating base class VehicleMagazine->CA_Magazine, by z\addons\dayz_code\config.bin/CfgMagazines/48Rnd_40mm_MK19/
Updating base class 4000Rnd_762x51_M134->CA_Magazine, by z\addons\dayz_code\config.bin/CfgMagazines/2000Rnd_762x51_M134/
Updating base class VehicleMagazine->CA_Magazine, by z\addons\dayz_code\config.bin/CfgMagazines/100Rnd_127x99_M2/
Updating base class VehicleMagazine->CA_Magazine, by z\addons\dayz_code\config.bin/CfgMagazines/50Rnd_127x107_DSHKM/
Updating base class Hatchet_Swing->Melee_Swing, by z\addons\dayz_code\config.bin/CfgMagazines/crowbar_swing/
Updating base class CA_Magazine->Melee_Swing, by z\addons\dayz_code\config.bin/CfgMagazines/Hatchet_Swing/
Updating base class Land_HouseV_1I2->House, by zero_buildings\config.cpp/CfgVehicles/Land_HouseV_1L2/
Updating base class Land_HouseV_1I2->House, by zero_buildings\config.cpp/CfgVehicles/Land_HouseV_3I3/
Updating base class ->Plane, by ca\air2\mv22\config.bin/CfgVehicles/MV22/
Updating base class ViewOptics->, by ca\air2\uh1y\config.bin/CfgVehicles/UH1_Base/Turrets/MainTurret/ViewOptics/
Updating base class ->HouseBase, by ca\misc_e\config.bin/CfgVehicles/House/
Updating base class ->Land_CamoNet_EAST, by ca\misc_e\config.bin/CfgVehicles/Land_CamoNet_EAST_EP1/
Updating base class ->Land_CamoNetB_EAST, by ca\misc_e\config.bin/CfgVehicles/Land_CamoNetB_EAST_EP1/
Updating base class ->Sign_1L_Noentry, by ca\misc_e\config.bin/CfgVehicles/Sign_1L_Noentry_EP1/
Updating base class ->Sign_circle, by ca\misc_e\config.bin/CfgVehicles/Helper_Base_EP1/
Updating base class ->Rifle, by ca\weapons_baf\config.bin/cfgWeapons/BAF_AS50_scoped/
Updating base class ->Rifle, by ca\weapons_e\config.bin/cfgWeapons/M60A4_EP1/
Updating base class ->M249, by ca\weapons_e\config.bin/cfgWeapons/M249_EP1/
Updating base class ->M249, by ca\weapons_e\config.bin/cfgWeapons/M249_m145_EP1/
Updating base class ->m107, by ca\weapons_e\m107\config.bin/CfgWeapons/m107_TWS_EP1/
Updating base class ->M240, by ca\weapons_e\m240\config.bin/CfgWeapons/m240_scoped_EP1/
Updating base class ->V3S_Base, by ca\wheeled_e\v3s\config.bin/CfgVehicles/V3S_Base_EP1/
Updating base class ->V3S_Base_EP1, by ca\wheeled_e\v3s\config.bin/CfgVehicles/V3S_Refuel_TK_GUE_EP1/
Updating base class House->DZE_OpenHouse, by warehouse\config.bin/CfgVehicles/Land_Ind_Pec_03/
Updating base class ->C130J_base, by ca\air_e\config.bin/CfgVehicles/C130J_US_EP1/
Updating base class ->Helicopter, by ca\air_e\ah6j\config.bin/CfgVehicles/AH6_Base_EP1/
Updating base class ->Plane, by ca\air_e\an2\config.bin/CfgVehicles/An2_Base_EP1/
Updating base class ->CH47_base_EP1, by ca\air_e\ch47\config.bin/CfgVehicles/CH_47F_EP1/
Updating base class ViewOptics->, by ca\air_e\uh1h\config.bin/CfgVehicles/UH1H_base/Turrets/MainTurret/ViewOptics/
Updating base class ->Soldier_Base_PMC, by ca\characters_pmc\config.bin/cfgVehicles/Soldier_Crew_PMC/
Updating base class ->Soldier_Base_PMC, by ca\characters_pmc\config.bin/cfgVehicles/Soldier_TL_PMC/
Updating base class ->Soldier_Base_PMC, by ca\characters_pmc\config.bin/cfgVehicles/Soldier_Bodyguard_M4_PMC/
Updating base class ->Soldier_Base_PMC, by ca\characters_pmc\config.bin/cfgVehicles/Soldier_Bodyguard_AA12_PMC/
Updating base class ->BAF_Soldier_MTP, by ca\characters_w_baf\config.bin/CfgVehicles/BAF_Soldier_W/
Updating base class ->BAF_Soldier_L_MTP, by ca\characters_w_baf\config.bin/CfgVehicles/BAF_Soldier_L_W/
Updating base class ->BAF_Soldier_Officer_MTP, by ca\characters_w_baf\config.bin/CfgVehicles/BAF_Soldier_Officer_W/
Updating base class ->BAF_Soldier_SniperH_MTP, by ca\characters_w_baf\config.bin/CfgVehicles/BAF_Soldier_SniperH_W/
Updating base class ->M113Ambul_Base, by ca\tracked_e\m113\config.bin/CfgVehicles/M113Ambul_UN_EP1/
Updating base class ->M113_Base, by ca\tracked_e\m113\config.bin/CfgVehicles/M113_UN_EP1/
Updating base class ->M113Ambul_Base, by ca\tracked_e\m113\config.bin/CfgVehicles/M113Ambul_TK_EP1/
Updating base class ->M113_Base, by ca\tracked_e\m113\config.bin/CfgVehicles/M113_TK_EP1/
Updating base class ->Helicopter, by ca\air_d_baf\config.bin/CfgVehicles/BAF_Merlin_HC3_D/
Link to comment
Share on other sites

29 answers to this question

Recommended Posts

  • 0
Fully Newbie

Fully

Posted
Posted

What does this mean?
under the above.

12:53:27 Server error: Player without identity Me Joining (id 1219150350)
12:53:30 Server error: Player without identity Me Joining (id 1222921023)
12:53:35 Server error: Player without identity Me Joining (id 1227257781)

All I get is "Session lost" error

Link to comment
Share on other sites
  • 0
Fully Newbie

Fully

Posted
Posted

Sorry, Its  a updated server, with 1.63 and epoch 1.0.5.1
New install well into a different directory.

New database.

 

So you saying the server needs steam open?
I connect or start arma through steam every time.

 

I have even moved the complete steam install into a directory. get the same issue.

 

The server running 1.62 with epoch 1.0.4.2 works like a charm.

 

I am at a loss why this is not working :/

Link to comment
Share on other sites
  • 0
ekroemer Newbie

ekroemer

Posted
Posted

I say the client needs Steam in Online mode (not Offline mode which is sufficient to start the game but not to connect anywhere).

 

How are you starting arma through Steam? A working connection to a 1.62 server will use another executable ($ARMA2OADIR/expansion/beta/arma2oe.exe) then a connection to an current 1.63 server ($ARMA2OADIR/arma2oa_be.exe).

 

I myself am mainly using bats, thus having full control of the startup process, so I'm not familiar with the Steam process.

Afair your Steam library offers

  1. the current game version in form of 'Arma2 Operation Arrowhead', perhaps with '[beta]' in brackets if you've opted into beta versions.
  2. the 1.62 version as deprecated 'Arma2 Operation Arrowhead Beta' (actual name may differ, but without brackets around beta)

Using 1 you cannot connect to 1.62 servers, using 2 you cannot connect to 1.63 servers. Your (the OP's?) server is 1.63.125548 , so I cannot imagine that you can use the very same connection method for both, 1.62 and 1.63.

Link to comment
Share on other sites
  • 0
ekroemer Newbie

ekroemer

Posted
Posted

Yes, I find it quite irritating that I need to have a functional internet connection to play a singleplayer game on my own PC.

I had preferred to keep Steam in Offline mode, for fear of unwanted game updates (despite deactivated 'keep up to date') and because I can then isolate my PC from the internet while playing.

 

But no, the player without identity message only stops when I change Steam into Online mode :-(

Link to comment
Share on other sites
  • 0
ekroemer Newbie

ekroemer

Posted
Posted

DZC wouldn't concern me too much, but the rest sounds as if the connection had been attempted with incorrect expansions, resulting in a kick, reverting to the Arma menu.

No Epoch-Screen at all?

Try a (modify IP and STEAMPATH if necessary and copy into your Arma2OA directory) bat-File

@echo off

rem path to Steam, change this!
set STEAMPATH=C:\Program Files (x86)\Steam

rem server connection information
set IP=5.9.138.103
set PORT=2302
set MODS=@DayZ_Epoch;

rem don't change below
set ARMA2OAPATH=%STEAMPATH%\SteamApps\common\Arma 2 Operation Arrowhead
set ARMA2PATH=%STEAMPATH%\SteamApps\common\Arma 2
start ""  "%ARMA2OAPATH%\ArmA2OA_BE.exe" 0 0 -skipintro -mod=%MODS% -noSplash -noFilePatching -world=empty -connect=%IP% -port=%PORT% "-mod=%ARMA2PATH%;expansion;"

@exit
Link to comment
Share on other sites
  • 0
V415 Newbie

V415

Posted
  • Author
Posted

 

DZC wouldn't concern me too much, but the rest sounds as if the connection had been attempted with incorrect expansions, resulting in a kick, reverting to the Arma menu.

No Epoch-Screen at all?

Try a (modify IP and STEAMPATH if necessary and copy into your Arma2OA directory) bat-File

@echo off

rem path to Steam, change this!
set STEAMPATH=C:\Program Files (x86)\Steam

rem server connection information
set IP=5.9.138.103
set PORT=2302
set MODS=@DayZ_Epoch;

rem don't change below
set ARMA2OAPATH=%STEAMPATH%\SteamApps\common\Arma 2 Operation Arrowhead
set ARMA2PATH=%STEAMPATH%\SteamApps\common\Arma 2
start ""  "%ARMA2OAPATH%\ArmA2OA_BE.exe" 0 0 -skipintro -mod=%MODS% -noSplash -noFilePatching -world=empty -connect=%IP% -port=%PORT% "-mod=%ARMA2PATH%;expansion;"

@exit

 

 

Thanks, tried that, same result, kicked back to the create game screen. 

Link to comment
Share on other sites
  • 0
Fully Newbie

Fully

Posted
Posted

I've been stumped by this trying to start a local test server on my own pc. Can never connect, only get the endless loop of Player without identity, too

I get the same issue on my test server.

 

I use a .bat files to run 1.62.103718 arma2oa to connect to my epoch 1.0.4.2 server.

 

My steam is run online as administator. I use set launch options in properties on the Arma2 OA.game

Then just use the following for what I want to connect to eg...

 

//Overpoch
"-mod=Expansion;@DayzOverwatch;@DayZ_Epoch;@DayZEpochPanthera_Panthera;" -nosplash -emptyworld
//Epoch
"-mod=Expansion;@DayZ_Epoch;" -nosplash -emptyworld

i use the Epoch to connect to my server, but get the error "Session Lost"

Then I have  a look at the .rpt log

This what is in there.

12:53:27 Server error: Player without identity Fully (id 1219150350)
Link to comment
Share on other sites
  • 0
insertcoins Newbie

insertcoins

Posted
Posted

 

I get the same issue on my test server.

 

I use a .bat files to run 1.62.103718 arma2oa to connect to my epoch 1.0.4.2 server.

 

My steam is run online as administator. I use set launch options in properties on the Arma2 OA.game

Then just use the following for what I want to connect to eg...

 

//Overpoch
"-mod=Expansion;@DayzOverwatch;@DayZ_Epoch;@DayZEpochPanthera_Panthera;" -nosplash -emptyworld
//Epoch
"-mod=Expansion;@DayZ_Epoch;" -nosplash -emptyworld

i use the Epoch to connect to my server, but get the error "Session Lost"

Then I have  a look at the .rpt log

This what is in there.

12:53:27 Server error: Player without identity Fully (id 1219150350)

 

Jup, same.

 

except I try to start a 1.63 server

Link to comment
Share on other sites
  • 0
ekroemer Newbie

ekroemer

Posted
Posted

Hmm, I'm not sure if this is complicating matters: I've noticed that my Steam has installed itself under username 'User' while I'm logging into Win7 (and have installed Steam) under another username.

From this follows that the Arma2 profile (and %appdata%) used is a different one between starting the game from Steam/bat or DZC.

You say, you've started Steam as administrator, maybe yet another profile used?

 

@V414: what does your client rpt say? It's located in the %appdata% of the user starting arma.

Link to comment
Share on other sites
  • 0
V415 Newbie

V415

Posted
  • Author
Posted

So I found my way through the hive not starting up.

 

I had the config and hivext files in the "Config Examples" folder and not the instance that I moved to the main directory.

But of course with my luck that wasn't the magic bullet, we got another problem.

This is on the console:

 

2:05:38 Player bwp connecting.

 2:05:38 Mission DayZ Epoch Napf read from directory.
 2:05:41 BattlEye Server: IMPORTANT: Effective immediately BattlEye is no longer providing protection for servers using outdated non-Steam versions of the game. We're sorry, but this is due to GameSpy suddenly marking ALL cd-keys as valid, even if they are fake/generated.
 2:06:10 Player  kicked off by BattlEye: Client not responding
 2:06:10 Player bwp disconnected.

 

Still getting these as the last items in the RPT
 

 

Updating base class ->M113Ambul_Base, by ca\tracked_e\m113\config.bin/CfgVehicles/M113Ambul_TK_EP1/

Updating base class ->M113_Base, by ca\tracked_e\m113\config.bin/CfgVehicles/M113_TK_EP1/
Updating base class ->Helicopter, by ca\air_d_baf\config.bin/CfgVehicles/BAF_Merlin_HC3_D/
 

 

The new error is this, client log file below that, note: I can connect to any number of DayZ Epoch servers fine.
 

 

=====================================================================

Exe timestamp: 2014/07/05 19:43:30
Current time:  2014/08/14 02:05:37
 
Version 1.63.125548
Missing addons detected:
  napf
  dayz_anim
  dayz_code
  dayz_communityassets
  dayz_weapons
  dayz_equip
  dayz_epoch
  dayz_vehicles
  glt_m300t
  pook_h13
  csj_gyroac
  map_eu
  jetskiyanahuiaddon
Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.napf, dayz_anim, dayz_code, dayz_communityassets, dayz_weapons, dayz_equip, dayz_epoch, dayz_vehicles, glt_m300t, pook_h13, csj_gyroac, map_eu, jetskiyanahuiaddon
 
Link to comment
Share on other sites
  • 0
V415 Newbie

V415

Posted
  • Author
Posted

Imo those missing addons say that the Epoch expansion is not activated (on client).

 

That's my deduction as well, another user who can connect to epoch servers has the same problem as well, which would point back to something in the config?

047e74e25c.jpg

Link to comment
Share on other sites
  • 0
V415 Newbie

V415

Posted
  • Author
Posted

Already got it.

 

Here's the .bat

 

@echo off
start "arma2" /min "arma2oaserver.exe" -port=2302 "-config=instance_24_Napf\config.cfg" "-cfg=instance_24_Napf\basic.cfg" "-profiles=instance_24_Napf" -name=instance_24_Napf "-mod=@DayZ_Epoch;@DayZ_Epoch_Server;" "-showscripterrors;"
 
 
Unless i'm missing it somewhere else?
Link to comment
Share on other sites
  • 0
ekroemer Newbie

ekroemer

Posted
Posted

It would be more interesting to see the bat you use to connect your client to the server....

 

I don't want to offend anyone, but given the experience we've had with our players: there's a plethora of reasons why they could not connect to the server after the  change to Steam and the DZC desaster -- all of them rested between their ears, while the server was perfectly fine ;-)

Link to comment
Share on other sites
  • 0
V415 Newbie

V415

Posted
  • Author
Posted

It would be more interesting to see the bat you use to connect your client to the server....

 

I don't want to offend anyone, but given the experience we've had with our players: there's a plethora of reasons why they could not connect to the server after the  change to Steam and the DZC desaster -- all of them rested between their ears, while the server was perfectly fine ;-)

 

I totally agree, I feel like a dolt for the first part of this chain of mistakes however this one i'm convinced isn't solved so simply.

So I have 2, someone suggested the 2nd version both will be posted here

Version 1 (the stock one)

 

@echo off

start "arma2" /min "arma2oaserver.exe" -port=2302 "-config=instance_24_Napf\config.cfg" "-cfg=instance_24_Napf\basic.cfg" "-profiles=instance_24_Napf" -name=instance_24_Napf "-mod=@DayZ_Epoch;@DayZ_Epoch_Server;" "-showscripterrors;"
 

Version 2 (edited as suggested)

 

@echo off

 
rem path to Steam, change this!
set STEAMPATH=C:\Program Files (x86)\Steam
 
rem server connection information
set IP=//theserversactualIP//
set PORT=2302
set MODS=@DayZ_Epoch;
 
 
start "arma2" /min "arma2oaserver.exe" -port=2302 "-config=instance_24_Napf\config.cfg" "-cfg=instance_24_Napf\basic.cfg" "-profiles=instance_24_Napf" -name=instance_24_Napf "-mod=@DayZ_Epoch;@DayZ_Epoch_Server;" "-showscripterrors;"
 

 

Link to comment
Share on other sites
  • 0
ekroemer Newbie

ekroemer

Posted
Posted

You misunderstand me. My suggestion was for a bat file used for connecting to a server, that is: starting your client.

 

Your bat (both, the original one and the edited one (that is, apart from the definition of unused variables, the same)) start the server.

 

Your server bat looks fine to me; evidence points to an incorrect method of connecting to the server, that's an incorrect client configuration.

 

I think your server started fine and just waits for a connection. The hive config problem you found, shouldn't come into play here because the server tries a DB connection only when the first player connects.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share
Go to question listing

  • Discord

×
×
  • Create New...