Jump to content
  • Similar Content

    • By [email protected]
      Im setting up a new epoch 1.0.6 server with very little addons/mods installed, and when i was testing i realized safes/plotpoles/walls etc werent saving to the server database. Anyone got any ideas what might be wrong?
    • By must1ka5
    • By Achef
      So I recently started up in a new host and haven't gotten to make the server run, found that a ca/modules bis_fnc issue is recurring but doesn't affect players when running coop missions like the default arma 2 oa ones, but when trying with Epoch hive won't connect/start despite being configured.
      Hive error
      Meanwhile at line 23...
      I'm still bad with Pastebin, sorry.
      This error has been chasing me for 2 days now
    • By gskyline203
      First off I'm sure this question would be more appropriate on the DayZ Launcher Forums, but their email servers are screwed and i cant login, so im hoping someone here might be able to help me.
      I used this youtube video to set up my bare bones epoch server.
      Everything went well, and the server runs with no errors in the .RPT file. I can join it through the LAN server browser within Arma 2 OA just fine. What I am trying to do now is make my server joinable in public server lists like dayz launcher.
      I have port forwarded the arma ports and steam client ports as well.
      I have also allowed arma 2, arma 2 OA, arma2oaserver, and steam client through my firewall. 
      My server does show up on dayz launcher but as "Offline" with 0/0 players and 9999 ping. ( I dont know if I can only see it because its on my own network maybe? ) *Linksys Router*
      but that is my issue.
      This server is running on my dedi box at home with high speed download and upload (should be plenty) .
      I also made my dedi box's ip static. ( i did this after i created the server so maybe thats a no no?)
      Like I said I can join in just fine but only through the LAN browser in game. 
      I used a port checker to ensure my ports were in fact open, and used the dayz launcher server checker to ensure it can be found, and it did find it and said it would be added to the server list within 30 minutes. ( it did! but it shows up as offline! and unjoinable)
      *I have no idea if this means anything but i used mySQL with HeidiSQL when setting up my server* (I also ensure that the mysql service is running when i start my server up).
      At this point I have no idea what to do, so any thoughts would mean the world to me, thanks!
      Server IP = (steam query = 2303)
      P.S. Here is my "11_chenarus.cfg" and "basic.cfg" (again, im not sure if these are helpful but ill include them anyway)

    • By freakneek
      G'day, Guys and Girls,
      you might want grab another Rabbitman Beer or R4Z0R soda (if your not allowed beer). This is gonna be a long one!
      This tutorial goes into some length and is for the most part, copy/paste, from @Poncho's How to make Custom map content [ Tutorial & Ongoing Support ] tutorial. I had a major issue today trying to figure out why my map edit wasn't working. but after many thanks to the awesome @JasonTM, for identifying the issue, It has been found that you need to use a compiles line instead of a execVM line in the code.
      This tutorial is not my work.... BUT, I felt that this could use an update.
      ***for those of you who already know how to do this scroll down to the server_functions.sqf part!***

      Most people create these map additions, simply by launching dayz through an epoch server via dayz commander will give you a working editor, but some buildings (such as Barracks, Hospitals, and Fire Stations) will not spawn any loot.
      This is because of their class names. The default ARMA editor makes most building classnames begin with "Map_" . All buildings of this type will not spawn loot in dayz, this is inherited from the EU_ update to the editor. You may simply read through your code and change all these manually to (for example) "Land_A_Hospital" instead of the original "Map_A_Hospital" to trigger loot spawns within those buildings.
      There is however an easier way for those of you unfamiliar with code, which also adds a few extra items in. This will however remove some options brought by the EU_ update such as being able to place rocks/cliffs e.t.c so it is important to pick when you want to use the editor I am about to show you.
      It is called the Jon-C5- Editor Update by (surprisingly enough) Jon-C5-. It is available  here http://www.armaholic.com/page.php?id=5932
      To turn your map edits into functioning dayz map additions simply follow the instructions below (If you do not wish to use the Jon-C5-Editor, skip to step 4):
      1) Download the zip file linked above.
      2) Drag/copy&paste it into your Arma2 Operation Arrowhead folder (where your @dayz and @dayzepoch folder are stored)
      3) Launch dayz with the following launch options (set via steam or dayz commander):
      -mo[email protected]_EditorUpdate  
      4) Once you are in the main menus press ALT+E
      5) This will open up the editor click the Chernarus map then click ok.
      6) A map view will then pop up, on the right hand side you will see a list of categories:
                  - First click 'Centre' then right click on the map, select 'new',  and press ok,
                  - Next click 'Group' then right click on the map, slect 'new'. and press ok,
                  - Now click 'Unit' then right click on the map, select the unit you want - default may be 'Alsatian' the change from 'non playable' to 'playable'.
      7) You are now ready to start editing. To begin, enter the '3D View' and click on 'Vehicle' (this is where all the buildings are listed). Right click on the map and select 'new', The list will then appear.
      8) Once you have selected an item, the ALT key will allow you to raise or lower items, with the SHIFT key allowing you to spin it around.
      9) Once you are happy with the edit, save it (Name it something relative to the edit). Then check your edits, sometimes large items may shift from where you placed them.
      10) Locate the mission.sqf file, usually in My Documents > Arma 2 > Missions > "Your mission name"
      11) Open up the mission.sqf file, you must now make some small edits to allow it to add these items to your server. Example Below:
      Default mission.sqf code example, areas to edit show indicated.
      ----------------------------------------------------------Remove start Here activateAddons [ ]; Replace with: if (isServer) then { activateAddons []; initAmbientLife; ----------------------------------------------------------Remove End Here _vehicle_4 = objNull; if (true) then { _this = createVehicle ["Land_ruin_corner_2", [14110.31, 2782.1448, 3.8146973e-006], [], 0, "CAN_COLLIDE"]; _vehicle_4 = _this; _this setPos [14110.31, 2782.1448, 3.8146973e-006]; }; ------------------------------------------------------------------------------------------ Remove Start Here _this = createCenter west; _center_0 = _this; _group_0 = createGroup _center_0; _unit_2 = objNull; if (true) then { _this = _group_0 createUnit ["GER_Soldier_EP1", [14116.508, 2764.6309, 4.0054321e-005], [], 0, "CAN_COLLIDE"]; _unit_2 = _this; _this setUnitAbility 0.60000002; if (true) then {_group_0 selectLeader _this;}; if (true) then {selectPlayer _this;}; if (true) then {setPlayable _this;}; }; ----------------------------------------------------------------------------------------- Remove End Here _vehicle_192 = objNull; if (true) then { _this = createVehicle ["Land_a_stationhouse", [5160.0171, 2183.0002, 0.14117265], [], 0, "CAN_COLLIDE"]; _vehicle_192 = _this; _this setDir 211.89264; _this setPos [5160.0171, 2183.0002, 0.14117265]; }; ----------------------------------------------------------------------------------------Remove Start Here processInitCommands; runInitScript; Replace with: }; By Mr. Smith e.t.c finishMissionInit; ----------------------------------------------------------------------------------------Remove End Here Edited mission.sqf code example:
      if (isServer) then { _vehicle_4 = objNull; if (true) then { _this = createVehicle ["Land_ruin_corner_2", [14110.31, 2782.1448, 3.8146973e-006], [], 0, "CAN_COLLIDE"]; _vehicle_4 = _this; _this setPos [14110.31, 2782.1448, 3.8146973e-006]; }; _vehicle_192 = objNull; if (true) then { _this = createVehicle ["Land_a_stationhouse", [5160.0171, 2183.0002, 0.14117265], [], 0, "CAN_COLLIDE"]; _vehicle_192 = _this; _this setDir 211.89264; _this setPos [5160.0171, 2183.0002, 0.14117265]; }; }; // By Mr. Smith e.t.c **If the code editing is not done as follows, it will crash your server on start up. Mainly because of the unit spawn (in this example "GER_Soldier_EP1"), follow the instructions for editing the code and it will work fine**
      The Custom Content is now ready for publishing! Here is a quick, safe and guaranteed way to get your [working] edits into your server:
      1. Unpack your server.pbo
      2. Create a folder in the root of the server.pbo called: Maps     3. Drag your mapedit.sqf into this folder.     ***UPDATED PART FOR*** 4. In the init folder you will find a file called server_functions.sqf . Find these lines: // Precise base building 1.0.5 call compile preprocessFileLineNumbers Just above it add this line:
      call compile preprocessFileLineNumbers "\z\addons\dayz_server\maps\mapedit.sqf"; so now it looks like this....
      call compile preprocessFileLineNumbers "\z\addons\dayz_server\maps\mapedit.sqf"; // Precise base building 1.0.5 call compile preprocessFileLineNumbers  NOTE**:  Be sure to change the mapedit.sqf to whatever it is you have named your file, and that it corresponds with the execVM in your server_functions.sqf
      Having trouble moving roads and other similar items to where you want them?
      Want your buildings spawn straight and level like they do with the new epoch build system?
      _this setDir -415.88132; _this setVehicleInit "this setVectorUp [0,0,1];"; _this setPos [1939.5042, 14563.26, -0.068630017]; Beidi file should look as follows:
      Add the "INIT" line between the "AZIMUT" and "PARENT" lines.
      AZIMUT="-67.231117"; INIT="_this setVehicleInit "this setVectorUp [0,0,1];";"; PARENT=""; - Big thanks to @Wesley for that one!
      Want to edit the trader camps / locations (Chernarus Only)?
      Having trouble with buildings 'double-spawning'? (often creating duplicate doors in a building)
      Here is a little example of how to remove grass from in/around your buildings:
      OK i think that is pretty much it.....
  • Advertisement
  • Supporters
  • Discord

  • Create New...