[Release] 3.0 Door Management - No More Codes

dzrealkiller · November 24, 2014

huh?

Server_monitor.sqf? is that meant to be? :S not sure

Zupa · November 24, 2014

server_monitor.sqf

dzrealkiller · November 24, 2014

I'm looking but I'm not seeing :(

Heres my server_monitor.sqf could you have a fast scan over it please?

https://www.dropbox.com/s/jbxgvqxgt8lar26/server_monitor.sqf?dl=0

the only ownerPUID im seeing is from this:

if(typename (_worldspace select 3) == "ARRAY")then{

_vector = _worldspace select 3;

if(count _vector == 2)then{

if(((count (_vector select 0)) == 3) && ((count (_vector select 1)) == 3))then{

_vecExists = true;

};

}else{

//More than 3 or 4 elements found

//Might add a search for the vector, ownerPUID will equal 0

};

Found another:

if (typeOf (_object) == "Plastic_Pole_EP1_DZ") then {

_object setVariable ["plotfriends", _intentory, true];

};

_object setVariable ["OwnerPUID", _ownerPUID, true];

AND ANOTHER:

_ownerPUID = "0";

if (count _worldspace >= 3) then{

if(count _worldspace == 3) then{

if(typename (_worldspace select 2) == "STRING")then{

_ownerPUID = _worldspace select 2;

}else{

Zupa · November 24, 2014

I'm looking but I'm not seeing :(

Heres my server_monitor.sqf could you have a fast scan over it please?

https://www.dropbox.com/s/jbxgvqxgt8lar26/server_monitor.sqf?dl=0

put

	_object setVariable ["ownerPUID", _ownerPUID, true];

behind

	_object setVariable ["OwnerPUID", _ownerPUID, true];

dzrealkiller · November 24, 2014

Sorry to sound stupid but Put "A" behind "B" ? by behind would you mean Above?

This?

_object setVariable ["ownerPUID", _ownerPUID, true];

_object setVariable ["OwnerPUID", _ownerPUID, true];

OR maybe?

_object setVariable ["ownerPUID", _ownerPUID, true]; _object setVariable ["OwnerPUID", _ownerPUID, true];

Zupa · November 24, 2014

its the same.

Whatever you prefer looking at.

dzrealkiller · November 24, 2014

Ok going to test it now, Thanks by the way for helping :) I know I'm hard work as I don't really have a clue on what I'M doing :)

Oh also should this be saving my PUID for the doors In SQL database?

Zupa · November 24, 2014

The puid of the owner is attached to P4L so that will do that.

Your friend are saved in the gear sections of the object which is defined in update_object.sqf in your server.pbo

dzrealkiller · November 24, 2014

That has not worked :( I cant do eye scan and cant access manage door still :( just replaced the lock too

I have added a link for my MPmissions + @Dayz_Epoch_Server maybe It would be easier to spot where I messed up :S If you have time could you scan over it please.

https://www.dropbox.com/s/s5yli9g0ojvakdr/Server.zip?dl=0

Zupa · November 24, 2014

That has not worked :( I cant do eye scan and cant access manage door still :( just replaced the lock too

i advice u to go over the whole insturctions again :) and make sure everything is correct.

dzrealkiller · November 24, 2014

Already just gone over the whole thing and still don't work I just don't get It..

This is the plot management I'm using:

https://github.com/DevZupa/PlotManagement/blob/master/P4L_Epoch.md

I'm using this plot4life and Snap pro

https://github.com/RimBlock/Epoch/tree/master/A%20Plot%20for%20Life

And on your page it says to add this to compiles:

MaintainPlot = compile preprocessFileLineNumbers "zupa\plotManagement\maintain_area.sqf";

PlotPreview = compile preprocessFileLineNumbers "zupa\plotManagement\plotToggleMarkers.sqf";

PlotObjects = compile preprocessFileLineNumbers "zupa\plotManagement\plotObjects.sqf"; // NEW

But adding the above to Compiles makes my loading screen get stuck and by stuck I mean I can walk around in the game but cant see because the loading screen has not gone off.

If I put // In front of those three compiles I can load into the server fine but then my door management then says I don't have the rights.

This Is actually the third time installing Door management I added the lines that you said and done everything one step at a time and It wont work.

Any Ideas on what's going wrong?

Zupa · November 24, 2014

Check your client RPT for errors

dzrealkiller · November 24, 2014

Sorted the loading screen thing.

I messed up a little here in compiles your post said to put:

MaintainPlot = compile preprocessFileLineNumbers "zupa\plotManagement\maintain_area.sqf";

PlotPreview = compile preprocessFileLineNumbers "zupa\plotManagement\plotToggleMarkers.sqf";

PlotObjects = compile preprocessFileLineNumbers "zupa\plotManagement\plotObjects.sqf"; // NEW

I had to change that to:

MaintainPlot = compile preprocessFileLineNumbers "plotManagement\maintain_area.sqf";

PlotPreview = compile preprocessFileLineNumbers "plotManagement\plotToggleMarkers.sqf";

PlotObjects = compile preprocessFileLineNumbers "plotManagement\plotObjects.sqf"; // NEW

now the Dome works and it shows me my building parts in the plot managers GUI now so at least that's something fixed.

If I missed something as small as Zupa\ I can guarantee I'm over looking something stupidly small... I have checked everything with a fine tooth comb now tho...

It just has to be something somewhere with the ownerUPID thing... Everything works now except the Eye Scan and Manage Door :( Eye scan just says "Eye Scan: Failed" and the manager "you don't have the rights" It just has to be ownerUPID but where :S do you think It could be caused by anything else or would you say its something somewhere with the ownerUPID?

dzrealkiller · November 24, 2014

Ok, I have reinstalled It for the forth time and Its doing the same thing... and I followed It nice and slow looking and making sure every thing went to the correct places.. and yet I still can not access door manager and eye scan still do not work..

Has anyone else out there had this same problem that could let me know how to fix this section?

dzrealkiller · November 24, 2014

Just found my ArmA20A.RPT Its seeing something but what does it mean :S

evecVM "custom\maps\dayz_epoch_kamenka.s>

Error position: <evecVM "custom\maps\dayz_epoch_kamenka.s>

Error Undefined variable in expression: evecvm

File mpmissions\__CUR_MP.Chernarus\init.sqf, line 101

Error in expression <", ""];

};

} else {

player removeAction s_player_selfBloodbag;

s_player_selfBloo>

Error position: <s_player_selfBloodbag;

s_player_selfBloo>

Error Undefined variable in expression: s_player_selfbloodbag

File mpmissions\__CUR_MP.Chernarus\Scripts\Fn_SelfActions\fn_selfActions.sqf, line 24

Error in expression <yer_followdog = -1;

player removeAction s_player_manageDoor;

s_player_manageDoor>

Error position: <s_player_manageDoor;

s_player_manageDoor>

Error Undefined variable in expression: s_player_managedoor

File mpmissions\__CUR_MP.Chernarus\Scripts\Fn_SelfActions\fn_selfActions.sqf, line 994