Sexysev Posted August 24, 2014 Report Share Posted August 24, 2014 Hello all, So all was fine - server was showing on all launchers - had players and new players joining all the time. But we got a new IP. Ever since the server will not show on DZC. Nothing at all has changed but the ip. Still have the steamports in the config, etc. Anyone have an idea? Server info: http://www.gametracker.com/server_info/216.244.84.156:2302/ Link to comment Share on other sites More sharing options...
0 Triage Posted August 24, 2014 Report Share Posted August 24, 2014 Dayz commander is broke for a lot of people. Link to comment Share on other sites More sharing options...
0 Sexysev Posted August 24, 2014 Author Report Share Posted August 24, 2014 It's true. And it's sad. We went from a minimum of 15-20 people online and that was the min we could get up to 30+ all the time. Now we are lucky to have 4 people online. Link to comment Share on other sites More sharing options...
0 Namindu Posted August 24, 2014 Report Share Posted August 24, 2014 Give it a day, Leave the server on. and next day it should be in dayz commander. They do a scan for new server like one a day, once they scan it they will put it into a list, then send it out to dayz commander and such. Its really the steamport, shit. That F*cked it up. They should have just gone with the 1 port. But they do the whole scan this port then switch to another. Really is f*cking retarded. Link to comment Share on other sites More sharing options...
0 Sexysev Posted August 24, 2014 Author Report Share Posted August 24, 2014 The server has been up for a week....still not on DZC. Link to comment Share on other sites More sharing options...
0 TNT Posted August 24, 2014 Report Share Posted August 24, 2014 try putting in your config.cfg steamport = 2300; steamqueryport = 2301; if your Server ip is 2302 make sure the lines are not already in your config file , you also have to fully refresh all servers to see your server on the favorites list , you could try using dayz launcher aswell that shows up right away Link to comment Share on other sites More sharing options...
0 Sexysev Posted August 24, 2014 Author Report Share Posted August 24, 2014 I will try it. I don't use dzc bit it seems like 98% of my players did. Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted August 24, 2014 Report Share Posted August 24, 2014 I finally gave up on DayzCommander and I'm using DayzLauncher now. My servers show up 100% of the time on it. Link to comment Share on other sites More sharing options...
0 Darth_Rogue Posted August 25, 2014 Report Share Posted August 25, 2014 DayZ Launcher is working WAY better after this last update. 0.7 version seems to be quick and stable. It recognizes what mods each server is running and loads them up correctly when starting the game. It even prompts for a password on locked servers, which is more than I can say for Commander at this point. I have learned though that you need a couple things to get your server showing up right on Commander. You MUST have the version info close to the front of your server description. It CANNOT be close to the end like you used to be able to do. So you should have something like, ABC Epoch Server (1.0.5.1/125548) blah blah blah blah...... Then it won't look greyed out like it sometimes does. Also, make sure your Steam ports and Query ports are correct in your server.cfg file. Your query port should be your game port +1, the steam port is your game port +2 (e.g., 2302 - game port, 2303 - SteamQuery, 2304 Steamport). Worked like a charm for my server. Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted August 25, 2014 Report Share Posted August 25, 2014 Your Steam port and Steamquery port can be anything you want. It doesn't need to be +1 and +2. Link to comment Share on other sites More sharing options...
0 Darth_Rogue Posted August 25, 2014 Report Share Posted August 25, 2014 Your Steam port and Steamquery port can be anything you want. It doesn't need to be +1 and +2. Not true. Sorry, Zed. https://community.bistudio.com/wiki/Arma_3_Dedicated_Server#Port_Forwarding I tried the random ports and could not get my server to appear in Commander or even in the Steam server browser. After switching it to the +1 and +2 configuration it all worked fine. Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted August 25, 2014 Report Share Posted August 25, 2014 Not true. Sorry, Zed. https://community.bistudio.com/wiki/Arma_3_Dedicated_Server#Port_Forwarding I tried the random ports and could not get my server to appear in Commander or even in the Steam server browser. After switching it to the +1 and +2 configuration it all worked fine. I've used +1/+2 and -1/-2 and mine showed up just as infrequently with both in Dayz Commander. As a matter of fact, when my provider changed my ports to +1/+2 most of my players couldn't find my server until I changed the ports back to -1/-2 because of the caching system that DayzCommander uses. In DayzLauncher, they show up every time no matter what the steam ports. The ports on that page are just the default ports. They aren't required to be that. Link to comment Share on other sites More sharing options...
0 Caveman1 Posted August 26, 2014 Report Share Posted August 26, 2014 Hello all, So all was fine - servec was showing on all launchers - had players and new players joining all the time. But we got a new IP. Ever since the server will not show on DZC. Nothing at all has changed but the ip. Still have the steamports in the config, etc. Anyone have an idea? Server info: http://www.gametracker.com/server_info/216.244.84.156:2302/ Having the exact same issue with commander after an ip change and i know it's very frustrating. Tried every combo of ports and messing with the name let them sit for a few days and nothing in commander. No players joining anymore. Link to comment Share on other sites More sharing options...
0 Sexysev Posted August 26, 2014 Author Report Share Posted August 26, 2014 Having the exact same issue with commander after an ip change and i know it's very frustrating. Tried every combo of ports and messing with the name let them sit for a few days and nothing in commander. No players joining anymore. I feel your pain brother. Link to comment Share on other sites More sharing options...
0 f3cuk Posted August 27, 2014 Report Share Posted August 27, 2014 +1 for us. Had to update our IP a few days ago and so far no luck getting back on Dayz Commander resulting in close to none new players joining. Sexysev 1 Link to comment Share on other sites More sharing options...
Question
Sexysev
Hello all,
So all was fine - server was showing on all launchers - had players and new players joining all the time.
But we got a new IP. Ever since the server will not show on DZC. Nothing at all has changed but the ip. Still have the steamports in the config, etc.
Anyone have an idea?
Server info:
http://www.gametracker.com/server_info/216.244.84.156:2302/
Link to comment
Share on other sites
14 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now