patrick8996 Posted December 2, 2014 Report Share Posted December 2, 2014 On 12/2/2014 at 6:43 AM, jmuss85 said: I had this problem also but i aborted out of the server and came back in and has been working great for me every since I have had to abort each and every time or I cant use the shops or even loot, It kinda sucks Found this so a patch will be released tomorrow Link to comment Share on other sites More sharing options...
Fluffykoojo Posted December 2, 2014 Report Share Posted December 2, 2014 My steam ID and admin name are correct, saved, however in-game F1 doesn't pull up anything... Link to comment Share on other sites More sharing options...
Fluffykoojo Posted December 2, 2014 Report Share Posted December 2, 2014 Awol you mentioned some install notes, where can I find these? n/m Link to comment Share on other sites More sharing options...
Tobias Solem Posted December 2, 2014 Report Share Posted December 2, 2014 Most likely you haven't entered the right path to the BattlEye-filters in the hive-ini. Link to comment Share on other sites More sharing options...
Fluffykoojo Posted December 2, 2014 Report Share Posted December 2, 2014 In the install notes it tells me to edit a bunch of folders that I don't have, for example an SC folder or a DB folder Link to comment Share on other sites More sharing options...
Fluffykoojo Posted December 2, 2014 Report Share Posted December 2, 2014 Server is rented via gtxgaming btw if that helps any Link to comment Share on other sites More sharing options...
Tobias Solem Posted December 2, 2014 Report Share Posted December 2, 2014 On 12/2/2014 at 7:39 AM, Fluffykoojo said: In the install notes it tells me to edit a bunch of folders that I don't have, for example an SC folder or a DB folder DB-folder is the directory where you have your redis-installation, the SC-folder is the folder where you have your basic.cfg, config.cfg, and BattlEye-folder. Link to comment Share on other sites More sharing options...
Fluffykoojo Posted December 2, 2014 Report Share Posted December 2, 2014 Ok gotcha, and the battlEye path is set correctly in hive-ini...I'm thinking my problem is more simple than that. Link to comment Share on other sites More sharing options...
pr0dukt Posted December 2, 2014 Report Share Posted December 2, 2014 Spawn menu Vests and Headgear sub-menus are blank. minor but still an annoyance. Everything else seems to work fine. Link to comment Share on other sites More sharing options...
Tobias Solem Posted December 2, 2014 Report Share Posted December 2, 2014 On 12/2/2014 at 7:57 AM, pr0dukt said: Spawn menu Vests and Headgear sub-menus are blank. minor but still an annoyance. Everything else seems to work fine. Aye, devs are aware of this. Link to comment Share on other sites More sharing options...
happydayz Posted December 2, 2014 Report Share Posted December 2, 2014 On 12/2/2014 at 5:37 AM, vbawol said: Read the install notes, you need BEC + watchdog plugin. I have a problem... my hosting company does not support BEC... so I cant run any admin tools... Link to comment Share on other sites More sharing options...
happydayz Posted December 2, 2014 Report Share Posted December 2, 2014 their response "what files are these?!"... my response... if you want anyone to run an epoch server through you, you will need to enable BEC and redis (they wont allow either) am currently hiving my server off my second server's redis Link to comment Share on other sites More sharing options...
ImDaRealOddOne Posted December 2, 2014 Report Share Posted December 2, 2014 Download: http://epochmod.com/...load_server.php Go to the SC folder and copy and replace these files with the BattlEye files "Arma3Config/BattlEye" It worked for me! Do not forget to edit the EpochAH.hpp file with you ingame name and steam ID (SteamID64) }; adminMenu_Owner[] = {{"STEAMID","ADMINNAME"}}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; ADMINNAME will be used for the Admin log instead of in-game name. Link to comment Share on other sites More sharing options...
MPG Posted December 2, 2014 Report Share Posted December 2, 2014 Everything works great on my end. Took about 30 min. to set up and really you guys have done a great job. Have also got my 6 hour restarts working great. Link to comment Share on other sites More sharing options...
AdmiralAK Posted December 2, 2014 Report Share Posted December 2, 2014 hey guys, we are trying to set up more than 2 admins. if I was to add an additional = {"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"} to the string would that work? Also do I need to add our in game name and uid to the remainder of the code? like below? adminMenu_High[] = {{"XXXXXXXXXXXX","Jackalope"}}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_HighSetting[] = {"SPAWN-MENU","PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL","TARGET-AMMO","TARGET-KILL","VEHICLEFLIP","BANPANNEL"}; adminMenu_Low[] = {}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_LowSetting[] = {"PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL"}; adminMenu_BanReasons[] = {"Traderzone","Hacking","Glitch","Combat Log"}; Link to comment Share on other sites More sharing options...
Darth_Rogue Posted December 2, 2014 Report Share Posted December 2, 2014 On 12/2/2014 at 2:11 PM, AdmiralAK said: hey guys, we are trying to set up more than 2 admins. if I was to add an additional = {"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"} to the string would that work? Also do I need to add our in game name and uid to the remainder of the code? like below? adminMenu_High[] = {{"XXXXXXXXXXXX","Jackalope"}}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_HighSetting[] = {"SPAWN-MENU","PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL","TARGET-AMMO","TARGET-KILL","VEHICLEFLIP","BANPANNEL"}; adminMenu_Low[] = {}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_LowSetting[] = {"PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL"}; adminMenu_BanReasons[] = {"Traderzone","Hacking","Glitch","Combat Log"}; Yep, you got it. Just make sure to leave the extra set of brackets around the group, like so: adminMenu_High[] = {{"XXXXXXXXXXXX","Jackalope"},{"XXXXXXXXXXXX","RopeAdope"},{"XXXXXXXXXXX","Soaponarope"}}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_HighSetting[] = {"SPAWN-MENU","PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL","TARGET-AMMO","TARGET-KILL","VEHICLEFLIP","BANPANNEL"}; adminMenu_Low[] = {}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_LowSetting[] = {"PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL"}; adminMenu_BanReasons[] = {"Traderzone","Hacking","Glitch","Combat Log"}; AdmiralAK 1 Link to comment Share on other sites More sharing options...
AdmiralAK Posted December 2, 2014 Report Share Posted December 2, 2014 Thank you very bud! :) Darth_Rogue 1 Link to comment Share on other sites More sharing options...
MPG Posted December 2, 2014 Report Share Posted December 2, 2014 // Anti Hack antihack_Enabled = true; // built-in Anti-Hack antihack_addOnCheck = true; //addon check antihack_InvOpenCheck[] = {}; // blank array disables, enable with {6} distance in meters disallows gear access if another player is within this range also disables gear access in vehicles. antihack_banReason = "EpochMod.com Autoban"; antihack_checkFiles[] = { //script check, leave it blank to disable it {"\x\addons\a3_epoch_code\compile\setup\EPOCH_clientInit.sqf", "EPOCH_clientInit"}, {"\x\addons\a3_epoch_code\compile\EPOCH_onEachFrame.sqf", "EPOCH_onEachFrame"}, {"\x\addons\a3_epoch_code\compile\setup\EPOCH_masterLoop.sqf", "EPOCH_masterLoop"}, {"\x\addons\a3_epoch_code\compile\setup\EPOCH_client_rejectPlayer.sqf", "EPOCH_client_rejectPlayer"}, {"\x\addons\a3_epoch_code\compile\setup\EPOCH_clientRespawn.sqf", "EPOCH_clientRespawn"}, {"\x\addons\a3_epoch_code\compile\interface_event_handlers\EPOCH_KeyDown.sqf", "EPOCH_KeyDown"} }; adminMenu_Owner[] = {{"Steam ID Here","Junior"},{"Steam ID Here","Mike"}}; //{{"Steam ID","Junior"},{"STEAMID","ADMINNAME2"},...}; ADMINNAME will be used for the Admin log instead of in-game name. /* Available Settings: "PLAYER-TELEPORT" => Teleport Admin To Player and Player To Admin "MAP-TELEPORT" => Click on Map to Teleport "TARGET-HEAL" => Heal Target "TARGET-AMMO" => Give Target Ammo "TARGET-KILL" => Kill Target "VEHICLEFLIP" => Flip Vehicle "BANPANNEL" => Access to Banpannel "SPAWN-MENU" => Access to Spawn Menu */ adminMenu_High[] = {}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_HighSetting[] = {"PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL","TARGET-AMMO","TARGET-KILL","VEHICLEFLIP","BANPANNEL"}; adminMenu_Low[] = {}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_LowSetting[] = {"PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL"}; adminMenu_BanReasons[] = {"Traderzone","Hacking","Glitch","Combat Log"}; Link to comment Share on other sites More sharing options...
MPG Posted December 2, 2014 Report Share Posted December 2, 2014 On 12/2/2014 at 2:25 PM, MPG said: // Anti Hack antihack_Enabled = true; // built-in Anti-Hack antihack_addOnCheck = true; //addon check antihack_InvOpenCheck[] = {}; // blank array disables, enable with {6} distance in meters disallows gear access if another player is within this range also disables gear access in vehicles. antihack_banReason = "EpochMod.com Autoban"; antihack_checkFiles[] = { //script check, leave it blank to disable it {"\x\addons\a3_epoch_code\compile\setup\EPOCH_clientInit.sqf", "EPOCH_clientInit"}, {"\x\addons\a3_epoch_code\compile\EPOCH_onEachFrame.sqf", "EPOCH_onEachFrame"}, {"\x\addons\a3_epoch_code\compile\setup\EPOCH_masterLoop.sqf", "EPOCH_masterLoop"}, {"\x\addons\a3_epoch_code\compile\setup\EPOCH_client_rejectPlayer.sqf", "EPOCH_client_rejectPlayer"}, {"\x\addons\a3_epoch_code\compile\setup\EPOCH_clientRespawn.sqf", "EPOCH_clientRespawn"}, {"\x\addons\a3_epoch_code\compile\interface_event_handlers\EPOCH_KeyDown.sqf", "EPOCH_KeyDown"} }; adminMenu_Owner[] = {{"Steam ID Here","Junior"},{"Steam ID Here","Mike"}}; //{{"Steam ID","Junior"},{"STEAMID","ADMINNAME2"},...}; ADMINNAME will be used for the Admin log instead of in-game name. /* Available Settings: "PLAYER-TELEPORT" => Teleport Admin To Player and Player To Admin "MAP-TELEPORT" => Click on Map to Teleport "TARGET-HEAL" => Heal Target "TARGET-AMMO" => Give Target Ammo "TARGET-KILL" => Kill Target "VEHICLEFLIP" => Flip Vehicle "BANPANNEL" => Access to Banpannel "SPAWN-MENU" => Access to Spawn Menu */ adminMenu_High[] = {}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_HighSetting[] = {"PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL","TARGET-AMMO","TARGET-KILL","VEHICLEFLIP","BANPANNEL"}; adminMenu_Low[] = {}; //{{"STEAMID","ADMINNAME"},{"STEAMID","ADMINNAME2"},...}; adminMenu_LowSetting[] = {"PLAYER-TELEPORT","MAP-TELEPORT","TARGET-HEAL"}; adminMenu_BanReasons[] = {"Traderzone","Hacking","Glitch","Combat Log"}; this is how i got mine to work. Link to comment Share on other sites More sharing options...
Uriziel Posted December 2, 2014 Report Share Posted December 2, 2014 Yea guys, I got my Server from GTX but I don't get the admin menu to work too! I can open it but I always get kicked after using 1 action from the server "#0". I tried the fix from some posts above which work but only for one server restart! After the second restart it happen again,,, Any ideas `? GTX suport just say it will be fixed with the game development. lol MPG 1 Link to comment Share on other sites More sharing options...
FrenzyFire000 Posted December 2, 2014 Report Share Posted December 2, 2014 On 12/2/2014 at 2:42 PM, Uriziel said: Yea guys, I got my Server from GTX but I don't get the admin menu to work too! I can open it but I always get kicked after using 1 action from the server "#0". I tried the fix from some posts above which work but only for one server restart! After the second restart it happen again,,, Any ideas `? GTX suport just say it will be fixed with the game development. lol Same also with GTX. I have all my admins set up and working as far as opening the menu, but kicked for anything we try. Link to comment Share on other sites More sharing options...
DuckNukem Posted December 2, 2014 Report Share Posted December 2, 2014 The default admin tools seem to be working for me now,I downloaded the client files from the epochmod.com website http://epochmod.com/download_server.phpCopy the contents of the SC folder and replace them into your Arma3Config folder, this did the trick for me atleast.(you do need to setup the BEserver.cfg yourself) I AM USING GTX Link to comment Share on other sites More sharing options...
zombiestev3 Posted December 2, 2014 Report Share Posted December 2, 2014 So is everyone who have g issues with gtx. Anyone who has it working with gtx or those who have it working with another company Edit duck has it sorted Link to comment Share on other sites More sharing options...
Uriziel Posted December 2, 2014 Report Share Posted December 2, 2014 On 12/2/2014 at 3:27 PM, DuckNukem said: The default admin tools seem to be working for me now,I downloaded the client files from the epochmod.com website http://epochmod.com/download_server.phpCopy the contents of the SC folder and replace them into your Arma3Config folder, this did the trick for me atleast.(you do need to setup the BEserver.cfg yourself) I AM USING GTX Does it still work after the second restart ? And what do I need to write in the BEserver.cfg ? mine is empty! Link to comment Share on other sites More sharing options...
DuckNukem Posted December 2, 2014 Report Share Posted December 2, 2014 Your BEserver.cfg should look something like this RConPassword changemen0w <-------- your rcon pw MaxPing 400 MaxCreateVehiclePerInterval 100 1 MaxSetPosPerInterval 2 1 MaxSetDamagePerInterval 36 1 MaxAddBackpackCargoPerInterval 12 1 MaxAddMagazineCargoPerInterval 96 1 MaxAddWeaponCargoPerInterval 24 1 MaxDeleteVehiclePerInterval 48 1 MaxAttachToPerInterval 4 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now