insomniaK Posted January 17, 2015 Report Share Posted January 17, 2015 cannot read mission from bank error ??????? why i had my config set for epoch.Chernarus need help plz :( Link to comment Share on other sites More sharing options...
prone Posted January 17, 2015 Report Share Posted January 17, 2015 Link to comment Share on other sites More sharing options...
insomniaK Posted January 17, 2015 Author Report Share Posted January 17, 2015 nothing help in this post need someone to explain plz Link to comment Share on other sites More sharing options...
Ree Posted January 17, 2015 Report Share Posted January 17, 2015 You want help but you give us very little info to work with so you changed A3Server.cfg to epoch.Chernarus is that all you have done? Did you make sure in your mpmissions folder there a pbo named epoch.Chernarus.pbo Did you unwrap the missions.sqm? Do you have AiA installed? Link to comment Share on other sites More sharing options...
speaR Posted January 17, 2015 Report Share Posted January 17, 2015 These are the things you have to do to get, chernarus working This is what you need: A working Arma 3 Epoch server for example on Altis or Stratis. A Programm to open, extract and pack pbos, I recommend pbo manager. To edit the files an editor, for example notepad++. 1:you have to download the AllInArmaterrainPack which has the chernarus map inside. 2: extract the pack inside of your a3 server folder. 3: inside the @AllInArmaTerrainPack folder you can find a folder called keys. copy these keys inside the keys folder which is located in your arma 3 server folder ( the Epoch key should be also contained inside this folder) 4: check if you have a mission pbo inside your mpmissions folder, if yes you are fine, if not download the latest epoch files in which you will find it. 5: let the server load the chernarus mission. to get the server load the chernarus mission you have to go to SC\config.cfg find the line where it says epoch.Altis and change it to epoch.Chernarus. 6: edit your start parameter. open your server start bat. after @epoch_hive; add @AllInArmaTerrainpack; so the mods part looks like : -mod=@Epoch;@epoch_hive;@AllInArmaTerrainpack; 7: if you already had the server running with another map go to your Epoch server folder\DB and delete the dumb file, or create a folder to backup it there. 8: start your game with the @AllInArmaTerrainpack addon. If you're trying around editing with the 3D editor or other mods I suggest you starting the game with a bat which calls the parameters. create a bat with the following content for Epoch with the AiA pack: arma3.exe -mod=@Epoch;@AllInArmaTerrainpack; - noSplash. (for recruits : the -mods part tells the game which @ addons it has to load. -noSplash causes that there's no annoying Arma intro shown when starting the game. If you have any questions unanswered feel free to PM me or visit me in one of the TeamSpeak servers given in the signature. Link to comment Share on other sites More sharing options...
lexonaft Posted January 17, 2015 Report Share Posted January 17, 2015 This method did not. Link to comment Share on other sites More sharing options...
1Man Posted January 17, 2015 Report Share Posted January 17, 2015 Hey yoda use the force called Google Link to comment Share on other sites More sharing options...
nedfox Posted January 17, 2015 Report Share Posted January 17, 2015 Guys, if you want to be a server host / admin, you need to READ. Don't skip the longs posts thinking "that's too much work". READ, FOLLOW to the LETTER, LINE by LINE. Even spoonfeeding you, it requires you to follow the guides, thoroughly. If you think it's too much work, or you can't be CBA to read posts, then go play on a nice server and don't bother. speaR 1 Link to comment Share on other sites More sharing options...
insomniaK Posted January 18, 2015 Author Report Share Posted January 18, 2015 the server load with chernarus but i get kick by restriction 20 :O everything is vanilla no script Link to comment Share on other sites More sharing options...
insomniaK Posted January 18, 2015 Author Report Share Posted January 18, 2015 aia terrain pack installed *LAUNCH PARAMATER* START arma3server.exe -mod=@Epoch;@EpochHive;@AllInArmaTerrainpack; -config=D:\Games\a3epochServer\SC\config.cfg -port=2302 -profiles=SC -cfg=D:\Games\a3epochServer\SC\basic.cfg -name=SC *CONFIG* // EPOCH SERVER CONFIG // GLOBAL SETTINGS hostname = "blablablabla"; password = ""; passwordAdmin = "fdgfdgdfgdfg"; logFile = "A3Master.log"; verifySignatures = 2; BattlEye = 1; requiredBuild = 128075; // WHITELIST FILE TYPES allowedLoadFileExtensions[] = {:}; allowedPreprocessFileExtensions[] = {"sqf"}; allowedHTMLLoadExtensions[] = {:}; // WELCOME MESSAGE ("message of the day") // It can be several lines, separated by comma // Empty messages "" will not be displayed at all but are only for increasing the interval motd[] = { "", "" }; motdInterval = 5; // Time interval (in seconds) between each message // JOINING RULES maxPlayers = 100; // Maximum amount of players. Civilians and watchers, beholder, bystanders and so on also count as player. // VOTING voteMissionPlayers = 200; // Prevents Votes. voteThreshold = 2; // Prevents Votes. // INGAME SETTINGS disableVoN = 0; // If set to 1, Voice over Net will not be available vonCodecQuality = 20; // Quality from 1 to 30 persistent = 1; // If 1, missions still run on even after the last player disconnected. // MISSIONS CYCLE (see below) epoch.Altis epoch.Stratis epoch_noZ.Altis class Missions { class Epoch { template = epoch.Chernarus; // DO NOT CHANGE THIS, IT WILL BREAK YOUR SERVER difficulty = "veteran"; // difficulty settings: veteran == NORMAL, mercenary == HARDCORE }; }; kickDuplicate = 1; equalModRequired = 0; requiredSecureId = 2; timeStampFormat = "short"; // SCRIPTING ISSUES onUserConnected = ""; onUserDisconnected = ""; doubleIdDetected = ""; // SIGNATURE VERIFICATION onUnsignedData = "kick (_this select 0)"; // unsigned data detected onHackedData = "kick (_this select 0)"; //"ban (_this select 0)"; // tampering of the signature detected onDifferentData = "kick (_this select 0)"; misson is vanilla no script server load but i get kick battleye script restriction 20 #20 "(_this select 0) execVM "\A3\Soft_F_Bootcamp\Offroad_01\scripts\randomize_colors.sqf"" Link to comment Share on other sites More sharing options...
BullRaider Posted January 20, 2015 Report Share Posted January 20, 2015 These are the things you have to do to get, chernarus working This is what you need: A working Arma 3 Epoch server for example on Altis or Stratis. A Programm to open, extract and pack pbos, I recommend pbo manager. To edit the files an editor, for example notepad++. 1:you have to download the AllInArmaterrainPack which has the chernarus map inside. 2: extract the pack inside of your a3 server folder. 3: inside the @AllInArmaTerrainPack folder you can find a folder called keys. copy these keys inside the keys folder which is located in your arma 3 server folder ( the Epoch key should be also contained inside this folder) 4: check if you have a mission pbo inside your mpmissions folder, if yes you are fine, if not download the latest epoch files in which you will find it. 5: let the server load the chernarus mission. to get the server load the chernarus mission you have to go to SC\config.cfg find the line where it says epoch.Altis and change it to epoch.Chernarus. 6: edit your start parameter. open your server start bat. after @epoch_hive; add @AllInArmaTerrainpack; so the mods part looks like : -mod=@Epoch;@epoch_hive;@AllInArmaTerrainpack; 7: if you already had the server running with another map go to your Epoch server folder\DB and delete the dumb file, or create a folder to backup it there. 8: start your game with the @AllInArmaTerrainpack addon. If you're trying around editing with the 3D editor or other mods I suggest you starting the game with a bat which calls the parameters. create a bat with the following content for Epoch with the AiA pack: arma3.exe -mod=@Epoch;@AllInArmaTerrainpack; - noSplash. (for recruits : the -mods part tells the game which @ addons it has to load. -noSplash causes that there's no annoying Arma intro shown when starting the game. If you have any questions unanswered feel free to PM me or visit me in one of the TeamSpeak servers given in the signature. Pls give me the key's names. Link to comment Share on other sites More sharing options...
BullRaider Posted January 20, 2015 Report Share Posted January 20, 2015 I have these activated keys and even then the server expelled me whenever I try to enter it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now