Wait for Host Issue

[Rotzloch]

Hello

 

Perhaps someone can help me.

 

I have an Epoch Origins Server. Everything is working perfectly exept one thing not.

Sometimes the Battleye Server don't verify Player GUID's and every Player who want connect then, have "Wait for Host".

 

Normally this is between 5-10min. Today it was 19min. 

Everyone is on server in this Time, can play normal.

After this Battleye Server Pause every Player can connect normal.

 

I hope someone have a hint for this problem.

 

I have restarts every 3 hours. today the 19min "Wait for host" was 15min after restart.

 

Thanks

[XerxesIv]

Im having the same issue

[Rotzloch]

I'm using Arma 2 OA 125548 with Epoch 1.0.5.1.

 

@XerxesIv: Where do you host your server ?

[XerxesIv]

I'm using Arma 2 OA 125548 with Epoch 1.0.5.1.

 

@XerxesIv: Where do you host your server ?

Im using a dedicated box

[tylerjohnson]

Post your cfg file. I just fixed my issue and it was the steam port information in there.

[Rotzloch]

This is my config.cfg

steamport = 2300;
steamqueryport = 2301;
hostName = "DayZockerbude Epoch Origins [GER/ENG] [Launch Parameters: -mod=@DayzOrigins] [ Sector B | Origins Hero/Bandit Level 1-3, Small Garage, Large Garage | Spawn Select | Service Point's | Snap Build | Tow & Lift | Elevator | AI Missions | Selfbloodbag | Traderzone=Safezone | Take Clothes | DeployBike on Toolbox | Sleep in Tents/Houses ](1.0.5.1/125548) by dayzockerbude.de";
password = "";
passwordAdmin = "********";
maxPlayers = 50;
logFile = "server_log.txt";
voteThreshold = 2;
voteMissionPlayers = 3;
reportingIP = "";
timeStampFormat = "short";
motd[] = {
"DayZockerbude Epoch Origins",
"When you have Problems, TS3: dayzockerbude.de:9988",
"Homepage: dayzockerbude.de"};
motdInterval = 1;
vonCodecQuality = 11;
disableVoN = 0;
kickduplicate = 1;
persistent = 1;
BattlEye = 1;
requiredSecureId = 2;
doubleIdDetected = "";
onUserConnected = "";
onUserDisconnected = "";
onUnsignedData = "kick (_this select 0)";
onHackedData =  "kick (_this select 0)";
onDifferentData = "";
regularCheck = "";
requiredBuild = 125548;

class Missions
{
    class Mission1
    {
     template = "DayZ_Epoch_13.Tavi";
     difficulty="veteran";
    };

};

[tylerjohnson]

When you launch the server what port are you launching it on?

 

Also, steam now has a 64 character limit so you may want to reduce the limit of your server name.

 

moved requiredSecureId = 2; to below required build. I don't know if that matters, but everywhere I've seen that's where it should go.

[Rotzloch]

Port for server start is 2302.

I will change hostname and the position the setting you said.

[Rotzloch]

I have done this 2 thins. but the problem is still there. :(

Any other Hints?

[tylerjohnson]

If you have a teamspeak or something I can join you in a call and we can remote in to see whats going on. Up to you. PM with any information.

[hambeast]

had the same issue since 1.0.4 ish... I think its a battleye issue but not sure.

[Rotzloch]

Tylerjohnson, sent you a PM. Thanks

[T.LEE]

del

[HellWalker]

Did you solve this problem?

[HellWalker]

Well, i don't know you guys.. but what solved my problem was a very simple solution...

I just needed to add these lines on top of my config.cfg file (in the instance_XX_MAPNAME folder)

steamport = 2300;
steamqueryport = 2301;

=D hope it help

[Rotzloch]

So, i think the problem was solved by it own. 

But since today the problem is coming back :(

 

Thats my Steamports in config.cfg

steamport = 2304;
steamqueryport = 2303;

 

Is that a problem? 

Connection port is 2302.

 

Thanks

Rotzloch

[HellWalker]

So, i think the problem was solved by it own. 

But since today the problem is coming back :(

 

Thats my Steamports in config.cfg

steamport = 2304;
steamqueryport = 2303;

Is that a problem? 

Connection port is 2302.

 

Thanks

Rotzloch

 

I had this problem.

And, as far as i know, the steam port should be:

steamport = 2300;
steamqueryport = 2301;

This works fine for me, and i'm also using port 2302

[Externized]

I've had this problem to i think its battleye related.  :wacko:

[ghosted2014]

hiya please let me know if in wrong place i want to change the texture of large wooden walls but i dont know where to fin the files to edit it please can anyone helpt hanks

[Rotzloch]

With changing the port, the problem is still there... :(

[Corper]

With changing the port, the problem is still there... :(

might not be the issues then, im having this problem with a lingor server, im suspect of Keys being outdated or something