DrScandalous Posted April 9, 2015 Report Share Posted April 9, 2015 Put one cinder wall down in the ground. To build another one connected/snapped to an end at a 90 degree angle (think corner of a building)... is there any way to snap it so you KNOW it's at the same height/angle? Am I missing something obvious here? Step 1: _ Step 2: _| (only even/same size on the 2nd piece, lol) Link to comment Share on other sites More sharing options...
Dwarfer Posted April 9, 2015 Report Share Posted April 9, 2015 what i tend todo is snap it next to it in a line then once its snapped press 3 to rotate 90 then free build the height Check about 3:00 in I have a vid on it KPABATOK 1 Link to comment Share on other sites More sharing options...
DrScandalous Posted April 9, 2015 Author Report Share Posted April 9, 2015 That's a good tip... I'll look into it. I guess I'm wondering if there's an actual corner/snapping option that functions at 90 degrees so when you build a box/foundation that it'll work with the current floors (as a roof) gride seamlessly... Link to comment Share on other sites More sharing options...
KPABATOK Posted April 9, 2015 Report Share Posted April 9, 2015 yeah I never tried free mode with cinder, cause I wanted to make some corners myself now and all I did was to try to align as much as possible with a foundation (which is a perfect square), so snap to one side, then for 90 degrees just had to make sure both ends of a wall are "straight" so to speak. I didnt even know you can rotate 90 degrees, but I guess it is because I was trying to rotate the ghost object, not physical one. Link to comment Share on other sites More sharing options...
