Grimslayer828 Posted May 11, 2017 Report Share Posted May 11, 2017 I don't know if this is the right place for this but I am very desperate at this point. Whenever I login to my DayZ Overpoch taviana 2.0 server (144.217.0.248:5302) I receive this error message "ErrorMessage: Include file z\addons\dayz_code\Configs\RscDisplay\ZSCdefines.hpp not found." I have uninstalled all my mods and re downloaded them, I have uninstalled both arma 2 and arma 2 oa and still won't work. I have verified the files of both Armas and it always pops up saying a file is missing and will be reacquired but it doesn't fix anything and it just repeats it over and over. I have restarted my computer multiple times during my attempts to fix it and it was to no avail. When I go on Arma 2 oa it also says that I have an "invalid crew tk_solider_pilot_ep1 in uh1h_tk_ep1" What can i do to fix this I have noticed that I can get on any other server but the one im currently playing on and I searched this error message and got no solutions nor did it even pop up. reply Link to comment Share on other sites More sharing options...
S4M Posted May 11, 2017 Report Share Posted May 11, 2017 HI, Make sure you have this. in description.ext Spoiler #include "\z\addons\dayz_code\Configs\RscDisplay\ZSCdefines.hpp" My advice is to install a script and test .... successively. Link to comment Share on other sites More sharing options...
natoed Posted May 11, 2017 Report Share Posted May 11, 2017 You will be a better reply if you had posted in the arma 2 section of the forum, cause this section of the forum is for arma 3 Link to comment Share on other sites More sharing options...
S4M Posted May 11, 2017 Report Share Posted May 11, 2017 I have not even noticed, I think it's time to sleep... Link to comment Share on other sites More sharing options...
salival Posted May 11, 2017 Report Share Posted May 11, 2017 Normally what this means is the server you are connecting to is running @epoch on the commandline before @overwatch. DayZ launcher does this sometimes, the easiest way is to manually connect with the mods in the correct order. i.e "-mod=@DayzOverwatch;@DayZ_Epoch" Relentless 1 Link to comment Share on other sites More sharing options...
azzdayz Posted May 11, 2017 Report Share Posted May 11, 2017 I had the same issue last night as well and then later it would launch, but it would launch as overwatch so it wouldn't work. I checked my order for the launch parameters and they were right. I finally threw my hands up and said I'll figure it out tomorrow, but then I looked this morning and now the launcher is not showing any launch parameters at all and I can't log onto any server. Long story short, I thing Dayz Launcher is having issues right now. Can anyone verify this? Link to comment Share on other sites More sharing options...
S4M Posted May 11, 2017 Report Share Posted May 11, 2017 @azzdayz I also had 2 days with problems Link to comment Share on other sites More sharing options...
S4M Posted May 12, 2017 Report Share Posted May 12, 2017 Okay, I do not know if it's my problem or the DayzLauncher. But my server appears as: Spoiler ip85.XXXXXXXX | Dayz Epoch |Dayz Overwatch | It should look like this: ip85.XXXXXXXX | Dayz Overwatch |Dayz Epoch | My .Bat files Spoiler Monitor: Spoiler @echo off cls echo Watching arma2oaserver For Crashes/Restarts... echo If you want to close arma2oaserver and this script, close the arma2oaserver window and type Y depending on your language followed by Enter. title Raklatif's Arma2OA Monitor set becpath="B:\Dayz 1.0.6.1\instance_1_Overpoch_Chernarus\BattlEye\Bec" cd /d %becpath% :arma2oaserver start "BattleEye Extended Control" "BEC Control Epoch.bat" echo (%time%) arma2oaserver started. start /wait "arma2" /min /high "B:\Dayz 1.0.6.1\arma2oaserver.exe" -cpuCount=2 -maxmem=2047 -exThreads=1 -port=2320 "-config=instance_1_Overpoch_Chernarus\config.cfg" "-cfg=instance_1_Overpoch_Chernarus\basic.cfg" "-profiles=instance_1_Overpoch_Chernarus" -name=instance_1_Overpoch_Chernarus "-mod=@DayzOverwatch;@DayZ_Epoch;@extDB;@DayZ_Epoch_Server;" echo (%time%) WARNING: arma2oaserver closed or crashed, restarting. // TIMEOUT /T 180 /NOBREAK goto arma2oaserver Restart: Spoiler @echo off echo Stopping server cd B:\Dayz 1.0.6.1 start /wait Premod_stop.bat echo Starting BEC cd B:\Dayz 1.0.6.1\instance_1_Overpoch_Chernarus\BattlEye\Bec start Bec.exe -f Config.cfg echo Starting server cd B:\Dayz 1.0.6.1 start "arma2" /min arma2oaserver.exe -port=2320 "-config=instance_1_Overpoch_Chernarus\config.cfg" "-cfg=instance_1_Overpoch_Chernarus\basic.cfg" "-profiles=instance_1_Overpoch_Chernarus" -name=instance_1_Overpoch_Chernarus "-mod=@DayzOverwatch;@DayZ_Epoch;@extDB;@DayZ_Epoch_Server;" ping 127.0.0.1 -n 5 >NUL If I try to log in from dayzLauncher it gives me this error: "ErrorMessage: Include file z\addons\dayz_code\Configs\RscDisplay\ZSCdefines.hpp not found." It's super strange, do not touch anything for days .... Link to comment Share on other sites More sharing options...
azzdayz Posted May 12, 2017 Report Share Posted May 12, 2017 Mine is still doing it as well. Exact same thing. I was hopping it was dayzlauncher and was just waiting for it to get corrected, but I am going to try and move the whole server to a different IP address this weekend and see if it shows up correct with that changed. If not then I am going to start from scratch and create a whole new server files. If that still does not fix it then I don't know what else to try. If it comes up right on a new IP then I know there is nothing wrong with the server files for sure. Hoping someone else has a clear answer or dayzlaunch corrects itself before I do all that though :/ Link to comment Share on other sites More sharing options...
Jim90 Posted May 13, 2017 Report Share Posted May 13, 2017 Here is a little Bat file you can run from your desktop to join your server without using launcher. 1. Save this as a .txt file on your desktop and rename it Launch.bat 2. In lines 4 and 5 check that these are the paths to Arma 2 and Arma 2 Operation Arrowhead directories on your computer. Change as necessary. 3. In line 6 Replace 00.00.00.00 and 2302 with the IP and port of the server you wish to join 4. if you use a password place it after -password= (no space between the = and the password) I have a row of these on my desktop for servers I commonly join. Spoiler :: @echo off color 30 set arma2oapath=C:\Program Files (x86)\Steam\steamapps\common\Arma 2 Operation Arrowhead set arma2path=C:\Program Files (x86)\Steam\steamapps\common\Arma 2 start "" "%arma2oapath%\ArmA2OA_BE.exe" 0 0 -skipintro -mod=@DayzOverwatch;@Dayz_Epoch -noSplash -noFilePatching -world=Chernarus -cpuCount=4 -exThreads=3 -maxMem=2048 -maxVram=1024 -connect=00.00.00.00 -port=2302 -password= "-mod=%arma2path%;expansion;" echo. echo. echo =================================================== echo ====== Starting Overpoch ======= echo =================================================== echo. echo. timeout 4 @exit :: To use this for Epoch in line 6 change -mod=@DayzOverwatch;@Dayz_Epoch to -mod=@Dayz_Epoch Link to comment Share on other sites More sharing options...
S4M Posted May 13, 2017 Report Share Posted May 13, 2017 Hi all, It was DZLauncher problem, it showed my mods inverted, solved !! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now