Jump to content

DP Build Everything Arma Core / eXpansions / JBAD

Recommended Posts

DP Build Everything Arma Series of Addons
Core / Expansions / JBAD

with EPOCH Compatibility and a custom Vector Build system
Steam Core: https://steamcommunity.com/sharedfiles/filedetails/?id=892365572
Steam Expansions: http://steamcommunity.com/sharedfiles/filedetails/?id=883811083
Steam JBAD: http://steamcommunity.com/sharedfiles/filedetails/?edit=true&id=897730436

Original Release Thread and Support:

This addon supports all Arma 3 gamemodes but has been getting upgrades to support multiple mods.

2300+ Arma 3 Assets including all DLCs and Expansions (Hence Build EVERYTHING Arma)
Epoch custom interaction system will also work with the next DPBEA Update.
Epoch support files will also be included in mod for changes to EPOCH functions and config.

A vector building system has been created specifically for EPOCH and built into the DPBEA addon.
It uses the same custom key setup that EPOCH has provided on the ESCAPE menu and adds the Vector Tilt key setup.
Once tested I will pull it out of DPBEA and release the Vector Building system in Server Addons section for those that would like to use it with or without DPBEA




Share this post

Link to post
Share on other sites

**DPBEA is getting the treatment**
[Split] DPBEA into a Core and an Expansions pbo for separate releases on Steam
[Naming] Build Everything Arma Core and Build Everything Arma Expansions.
[Future] More Build Everything Arma XXX releases including JBAD, OCP and more
[Added] Epoch constructions compatibility for using their Dynamic Interactions System with DPBEA Built Objects
[Added] Epoch Vector Building Systsem
[Added] Epoch Custom Keys will modify Vector Building keystrokes
[Fixed] Most objects inherited "DestructNo" from my fun config work and were indestructible 
[Added] Extra config entries for future features for eXpoch and Exile door locking

Update should be pushed out today after a few more final tests.

Share this post

Link to post
Share on other sites

DP Build Everything Arma
[Added] Large Rocks and Targets were not inheriting DPBEA Epoch/Exile configs properly for Move / Remove options 
[Changed] DPBEA Menu retitled to Build Everything Arma
[Upgrade] Categories Drop down now has new categories than just crates
[Upgrade] Categories now include individual objects based on what DPBEA mods are loaded since more are coming
[NEW] Crates_Core / Crates_eXpansions / Objects_Core / Objects_eXpansions
[Info] Object(s) categories display all 2300+ items if using both Core and eXpansions versions of DPBEA
[Info] Objects will spawn as an item in your inventory
[3rd Check] Verify all items have a picture or a props picture of a "?" 
[Coming Soon] DPBEA JBAD and OCP are dumped and configured for initial testing - first upload within 48hours

Share this post

Link to post
Share on other sites

DP Build Everything Arma JBAD
[Released] Adds 300 more objects to the DPBEA series
[INFO] Trees, buildings and more
[INFO] Will be added directly to OCPw/JBAD soon
[REQUIRES] DPBEA Core but it is up to you to have JBAD or OCPw/JBAD on your server or loaded on your client

A few more DPBEA series of addons to go and I will start doing the objects that look like containers to hold storage
If anyone would like to start making crafting recipes for Epoch and Exile, be my guest help is always welcome.
Steam Workshop Link

Share this post

Link to post
Share on other sites

I think I have the code in properly for vector building but I can't get Core Mod to work.

I added DPBEA Core to my server root and added the name to my server start parameters and also the key. I also added the mod to my game folder to run clientside.

When I'm in game I press Ctrl + B  and I get no menu.

Is this the right way to install?


Thank you.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Drokz
      I just created another server on the map i started to play arma with and hope some players are coming to join us :)
      [NOX] Epoch Panthera/Winthera | Zombies | Bike | Vector

      - Vector Building
      - Zombies (Epoch´s Ryanzombies) , lower Spawnrate in the fields, higher rate near buildings
      - Bike Crafting
      - Shorter crafting and building delays
      - Customized crafting and building recipes
      - Groundloot and Epoch Furnishes
      - Vehicle Traders and Servicepoints without Safezones
      - Tradezones with vehicle stealing protection and player/vehicle godmode
      - Earplugs
      - Autowalk 
      - A few AI Vehicle Patrols
      - blckeagls Mission System
      - low spawnrates for high-end gear
      - GPS shows map-position of you and your groupmates
      - 3 Days of vehicle locktime
      - Lockpick for Safes, Lockboxes and Vehicles
      - Paintshop for Vehicles
      - Panthera mod also includes a winthera map, means a winter version of panthera. So map will be switched into winter mode from time to time
      - Vampires Vehicle Degradation (Vehicles getting slowly damaged just by use them)
      - Fox Survival Vehicles
      - Cup Weapons
      - Apex and Laws of War Gear/Vehicles
      Mods needed:
      Island Panthera: https://steamcommunity.com/sharedfiles/filedetails/?id=708278910
      Epochmod: https://steamcommunity.com/sharedfiles/filedetails/?id=421839251
      CUP Terrains Core: https://steamcommunity.com/sharedfiles/filedetails/?id=583496184
      CUP Weapons: http://steamcommunity.com/sharedfiles/filedetails/?id=497660133
      Zombies and Demons: https://steamcommunity.com/sharedfiles/filedetails/?id=501966277
      CBA Arma 3: https://steamcommunity.com/sharedfiles/filedetails/?id=450814997
      Fox Vehicles:  https://steamcommunity.com/sharedfiles/filedetails/?id=933985898
      Feel free to join us and enjoy!
      Everybody is welcome beside kids with a bad behavior, hackers, glitchers and dupers of course.
      If you have any questions you can also visit our website: nox-epoch.de or join our discord here: https://discord.gg/84kF66J
      Sincerely xDrokZ
    • By ViseVersa
      i was currently working on rewriting the player_zombieCheck.sqf to a more nicer and faster Version, when i encountered a weired thing. Inside the script, the player_zombieAttack.sqf is called ([_x, "zombie"] spawn player_zombieAttack;) so i looked into the File and noticed a few things.

      First of all this is the only instance, where zombieAttack is called, so the type is allways "zombie" and could be taken out. I'm guessing they wanted to make dogs attack things to, but never completed it. The second thing is -
      if (!dayz_zedsAttackVehicles && !(_vehicle in _targets)) exitWith { //diag_log ("not attacking vehicle" + str(_vehicle)); };  
      Now the first bit is clear, it's a variable, that you can set in variables.sqf to determine, if zombies should be attacking a vehicle or not. But the second bit i'm confused from. "!vehicle in targets" - This yeah ok it means, that the vehicle should not be in the target list, but then again in the zombie Check it will add the vehicle to the target no matter what. So basically this means that the if is failing, because when the vehicle is NOT in the targets (which it is!) the script will exit.
      Honestly, this is melting my brain.

      I`m thinking about it like this if the vehicle is in targets it will return true, but the script will only exit, if it returns false, am i right? So this means, that if the vehicle is in targets the script won't exit and the zombie is still gonna attack the vehicle or not? I`m thinking, that the whole second part shouldn't even be in there, so it should look like:
      if (!dayz_zedsAttackVehicles) exitWith { //diag_log ("not attacking vehicle" + str(_vehicle)); };  
      I need help understanding this. Is my conclusion correct or not?
    • By Brainzaw
      Hello Forum.

      I have Snap Pro + Vector build installed https://github.com/strikerforce/SnapPro-BuildVectors
      and plot management. 
      I am experiencing when I build a garage door, twist it and snap it to a cinder wall so it is placed like this \ then there is no problem.
      BUT when i upgrade the garage door (so it actually has a door and it's not just the doorway), it jumps back to the default position! like this: |
      Sorry for the bad way of illustrating this, hope you guys understand, have experienced the same or can help me!

  • Advertisement
  • Supporters
  • Discord

  • Create New...