BetterDeadThanZed Posted December 15, 2014 Report Share Posted December 15, 2014 I'd like to see who is talking and on what channel on my server. Since there doesn't seem to be a profile to edit the difficulty settings, can I just add "vonid=1" to my server's config.cfg to display this? Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 18, 2014 Author Report Share Posted December 18, 2014 I tried this in my config.cfg with no luck. Any way to show who is talking? Link to comment Share on other sites More sharing options...
0 Coco-Nuts Posted December 18, 2014 Report Share Posted December 18, 2014 Did you tried to add this in your "Config.Arma3Profile" file ? Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 18, 2014 Author Report Share Posted December 18, 2014 Did you tried to add this in your "Config.Arma3Profile" file ? I would if I could find the file on my server but I don't see it anywhere. Link to comment Share on other sites More sharing options...
0 cen Posted December 18, 2014 Report Share Posted December 18, 2014 It's in the Users\ folder wherever you put the config.cfg RC_Robio 1 Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 18, 2014 Author Report Share Posted December 18, 2014 I finally found the profile file in /ServerConfig/Users/ServerConfig/ and it's called ServerConfig.Arma3Profile. Not in the same folder as config.cfg. Link to comment Share on other sites More sharing options...
0 cen Posted December 18, 2014 Report Share Posted December 18, 2014 I finally found the profile file in /ServerConfig/Users/ServerConfig/ and it's called ServerConfig.Arma3Profile. Not in the same folder as config.cfg. I said the users folder was in the same folder as config.cfg :D Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 18, 2014 Author Report Share Posted December 18, 2014 I said the users folder was in the same folder as config.cfg :D After I already found it, but thanks. :) Link to comment Share on other sites More sharing options...
0 cen Posted December 18, 2014 Report Share Posted December 18, 2014 After I already found it, but thanks. :) Oh forgot to turn my mind reading on yesterday... my bad. Richie 1 Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 18, 2014 Author Report Share Posted December 18, 2014 Putting settings in the ServerConfig.Arma3Profile file doesn't seem to affect anything. I didn't have a chance to test the vonid=1 setting, but I tried setting WeaponCursor=0; and HUDWp=0; but those both still worked when I joined the game. This also is not the file that contains the information like the Bliss.ArmA2OAProfile file does for A2. Here's what the ServerConfig.Arma3Profile contains: version=1; blood=1; singleVoice=0; gamma=1; brightness=1; maxSamplesPlayed=96; sceneComplexity=1000000; shadowZDistance=100; viewDistance=3800; preferredObjectViewDistance=3200; terrainGrid=3.125; volumeCD=10; volumeFX=10; volumeSpeech=10; volumeVoN=10; vonRecThreshold=0.029999999; The file I'm looking for should have entries like in the profile file for A2. For example: class Veteran { class Flags { Armor=1; FriendlyTag=0; EnemyTag=0; HUD=1; HUDPerm=0; HUDWp=1; HUDWpPerm=0; WeaponCursor=0; AutoAim=0; AutoGuideAT=0; 3rdPersonView=1; ClockIndicator=0; Map=0; Tracers=1; AutoSpot=0; UltraAI=0; DeathMessages=1; NetStats=1; VonID=1; }; skillFriendly=0.75; skillEnemy=0.75; precisionFriendly=0.75; precisionEnemy=0.75; }; Do we not have access to that file in A3 Epoch? I can't find it on my server. Link to comment Share on other sites More sharing options...
0 cen Posted December 18, 2014 Report Share Posted December 18, 2014 Go home you're drunk :D Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 18, 2014 Author Report Share Posted December 18, 2014 Mine doesn't look like that on my Vert Hosting server. It looks like what I posted. . Link to comment Share on other sites More sharing options...
0 Richie Posted December 18, 2014 Report Share Posted December 18, 2014 Mine looks like what Cen posted :unsure: maybe shared hosts have things removed or hidden, I'm on a dedi so contact Vert and ask. Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 19, 2014 Author Report Share Posted December 19, 2014 It looks like VertHosting didn't set that file up to include all the settings. I'll be adding them manually and I already advised them. Link to comment Share on other sites More sharing options...
0 cen Posted December 19, 2014 Report Share Posted December 19, 2014 Just add it manually and save the file. You don't have to include all the different ranks only the one you run, i.e. Veteran. This is mine: version=2; activeKeys[]={}; class Difficulties { class veteran { class Flags { Armor=0; FriendlyTag=1; EnemyTag=0; MineTag=0; HUD=1; HUDWp=1; HUDWpPerm=1; HUDGroupInfo=1; AutoSpot=0; WeaponCursor=1; ClockIndicator=1; 3rdPersonView=1; UltraAI=0; CameraShake=0; DeathMessages=1; NetStats=1; VonID=1; ExtendetInfoType=0; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; class mercenary { class Flags { HUD=1; AutoSpot=0; WeaponCursor=0; DeathMessages=1; NetStats=1; VonID=1; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; }; difficulty="veteran"; singleVoice=0; maxSamplesPlayed=96; sceneComplexity=1000000; shadowZDistance=100; viewDistance=3000; preferredObjectViewDistance=3000; terrainGrid=12.5; volumeCD=10; volumeFX=10; volumeSpeech=10; volumeVoN=10; vonRecThreshold=0.029999999; Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 19, 2014 Author Report Share Posted December 19, 2014 Just add it manually and save the file. You don't have to include all the different ranks only the one you run, i.e. Veteran. Did it yesterday, thanks. Link to comment Share on other sites More sharing options...
0 cen Posted December 19, 2014 Report Share Posted December 19, 2014 Of course you did :rolleyes: TheVampire and Major Khunt 2 Link to comment Share on other sites More sharing options...
0 Richie Posted December 19, 2014 Report Share Posted December 19, 2014 :lol: Cen making new friends, as always. TheVampire 1 Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted December 19, 2014 Author Report Share Posted December 19, 2014 Note the part where I said I'd be adding them manually 13 hours before you said to add them manually. That meant I'd add them... mad because I did it before you could tell me to do it? Link to comment Share on other sites More sharing options...
0 RRP47 Posted January 15, 2015 Report Share Posted January 15, 2015 I tried adding "vonid=1" to the ServerConfig.Arma3Profile on our vert server, but it didn't seem to work. Can ya help guide me Zed? Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted January 15, 2015 Author Report Share Posted January 15, 2015 I added it to my vert server and it worked fine so I don't know why it's not working for you. Try their support. They are very knowledgeable. Feel free to post your profile file and maybe something will stick out. Link to comment Share on other sites More sharing options...
0 Eolythique Posted January 15, 2015 Report Share Posted January 15, 2015 Hi, I had similar issue may be it's the same for you, check your file in Arma3Config\config.cfg Find // MISSIONS CYCLE (see below) epoch.Altis epoch.Stratis epoch_noZ.Altis class Missions { class Epoch { template = epoch.Chernarus; // DO NOT CHANGE THIS, IT WILL BREAK YOUR SERVER difficulty = "Veteren"; // difficulty settings: veteran == NORMAL, mercenary == HARDCORE }; }; Replace "Veteren" by "veteran" it should work. Sorry for my bad english but it's not my native language Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted January 16, 2015 Author Report Share Posted January 16, 2015 Here is my profile file. I have Veteran selected in the server config. Hopefully this helps you: version=1; blood=1; singleVoice=0; gamma=1; brightness=1; maxSamplesPlayed=96; vonid=1; class Difficulties { class recruit { class Flags { Armor=1; FriendlyTag=0; EnemyTag=0; MineTag=1; HUD=1; HUDPerm=1; HUDWp=1; HUDWpPerm=1; HUDGroupInfo=1; AutoSpot=1; Map=1; WeaponCursor=1; AutoGuideAT=1; ClockIndicator=1; 3rdPersonView=1; UltraAI=0; CameraShake=0; UnlimitedSaves=1; DeathMessages=1; NetStats=1; VonID=1; ExtendedInfoType=1; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; class regular { class Flags { Armor=1; FriendlyTag=1; EnemyTag=0; MineTag=1; HUD=1; HUDPerm=1; HUDWp=1; HUDWpPerm=1; HUDGroupInfo=1; AutoSpot=1; Map=1; WeaponCursor=1; AutoGuideAT=1; ClockIndicator=1; 3rdPersonView=1; UltraAI=0; CameraShake=1; UnlimitedSaves=1; DeathMessages=1; NetStats=1; VonID=1; ExtendedInfoType=1; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; class veteran { class Flags { Armor=0; FriendlyTag=0; EnemyTag=0; MineTag=1; HUD=1; HUDWp=1; HUDWpPerm=1; HUDGroupInfo=1; AutoSpot=0; WeaponCursor=0; ClockIndicator=1; 3rdPersonView=1; UltraAI=0; CameraShake=0; DeathMessages=1; NetStats=1; VonID=1; ExtendedInfoType=0; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; class mercenary { class Flags { HUD=1; AutoSpot=0; WeaponCursor=0; DeathMessages=0; NetStats=1; VonID=1; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; }; sceneComplexity=1000000; shadowZDistance=100; viewDistance=3800; preferredObjectViewDistance=3200; terrainGrid=3.125; volumeCD=10; volumeFX=10; volumeSpeech=10; volumeVoN=10; vonRecThreshold=0.029999999; Link to comment Share on other sites More sharing options...
0 alipuh Posted June 17, 2015 Report Share Posted June 17, 2015 Here is my profile file. I have Veteran selected in the server config. Hopefully this helps you: version=1; blood=1; singleVoice=0; gamma=1; brightness=1; maxSamplesPlayed=96; vonid=1; class Difficulties { class recruit { class Flags { Armor=1; FriendlyTag=0; EnemyTag=0; MineTag=1; HUD=1; HUDPerm=1; HUDWp=1; HUDWpPerm=1; HUDGroupInfo=1; AutoSpot=1; Map=1; WeaponCursor=1; AutoGuideAT=1; ClockIndicator=1; 3rdPersonView=1; UltraAI=0; CameraShake=0; UnlimitedSaves=1; DeathMessages=1; NetStats=1; VonID=1; ExtendedInfoType=1; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; class regular { class Flags { Armor=1; FriendlyTag=1; EnemyTag=0; MineTag=1; HUD=1; HUDPerm=1; HUDWp=1; HUDWpPerm=1; HUDGroupInfo=1; AutoSpot=1; Map=1; WeaponCursor=1; AutoGuideAT=1; ClockIndicator=1; 3rdPersonView=1; UltraAI=0; CameraShake=1; UnlimitedSaves=1; DeathMessages=1; NetStats=1; VonID=1; ExtendedInfoType=1; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; class veteran { class Flags { Armor=0; FriendlyTag=0; EnemyTag=0; MineTag=1; HUD=1; HUDWp=1; HUDWpPerm=1; HUDGroupInfo=1; AutoSpot=0; WeaponCursor=0; ClockIndicator=1; 3rdPersonView=1; UltraAI=0; CameraShake=0; DeathMessages=1; NetStats=1; VonID=1; ExtendedInfoType=0; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; class mercenary { class Flags { HUD=1; AutoSpot=0; WeaponCursor=0; DeathMessages=0; NetStats=1; VonID=1; }; skillFriendly=0.60000002; skillEnemy=0.60000002; precisionFriendly=0.28; precisionEnemy=0.28; }; }; sceneComplexity=1000000; shadowZDistance=100; viewDistance=3800; preferredObjectViewDistance=3200; terrainGrid=3.125; volumeCD=10; volumeFX=10; volumeSpeech=10; volumeVoN=10; vonRecThreshold=0.029999999; Armor=1; It does not work Link to comment Share on other sites More sharing options...
0 BetterDeadThanZed Posted June 19, 2015 Author Report Share Posted June 19, 2015 Armor=1; It does not work That's not an option I set. It's a default setting that has nothing to do with the vonid discussed in the OP. Link to comment Share on other sites More sharing options...
Question
BetterDeadThanZed
I'd like to see who is talking and on what channel on my server. Since there doesn't seem to be a profile to edit the difficulty settings, can I just add "vonid=1" to my server's config.cfg to display this?
Link to comment
Share on other sites
24 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now