rsxownes Posted December 13, 2014 Report Share Posted December 13, 2014 For some reason my server is not publicly viewable when you filter for it. But when me and my friends enter in the IP address and the port for the server, it pops up. What could be causing this? I have already forwarded the ports from my server box. Link to comment Share on other sites More sharing options...
Coco-Nuts Posted December 13, 2014 Report Share Posted December 13, 2014 Check your Steamport and Steamquery in your config.cfg file. Link to comment Share on other sites More sharing options...
rsxownes Posted December 13, 2014 Author Report Share Posted December 13, 2014 Check your Steamport and Steamquery in your config.cfg file. I have a config.cfg file in the BEC folder and the SC folder. which one? Link to comment Share on other sites More sharing options...
rsxownes Posted December 13, 2014 Author Report Share Posted December 13, 2014 Check your Steamport and Steamquery in your config.cfg file. This is what my config.cfg file looks like, still cannot view it in the server list. Only when we specify the IP address and port when we click remote within arma. // GLOBAL SETTINGS hostname = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"; password = ""; passwordAdmin = "xxxxxxx"; logFile = "A3Master.log"; verifySignatures = 2; BattlEye = 1; requiredBuild = 128075; steamPort = 2304; steamQueryPort = 2303; Link to comment Share on other sites More sharing options...
Coco-Nuts Posted December 13, 2014 Report Share Posted December 13, 2014 What is your server port ? Link to comment Share on other sites More sharing options...
Mantaray Posted December 13, 2014 Report Share Posted December 13, 2014 steamQueryPort should be a number above the game port like : gameport :2303 steamQueryPort = 2304 but your steamport is not like mine i maybe worng but thats what ive always been told :P Link to comment Share on other sites More sharing options...
uniflare Posted December 13, 2014 Report Share Posted December 13, 2014 Have you even port forwarded? Link to comment Share on other sites More sharing options...
Toby_ASS Posted December 13, 2014 Report Share Posted December 13, 2014 I will aks an other Admin, they had the same problem... Link to comment Share on other sites More sharing options...
TomTom Posted December 13, 2014 Report Share Posted December 13, 2014 If your Server won´t show up after restart check your startup parameters... There must be an-autoinit included Link to comment Share on other sites More sharing options...
rsxownes Posted December 13, 2014 Author Report Share Posted December 13, 2014 What is your server port ? 2302 Link to comment Share on other sites More sharing options...
rsxownes Posted December 13, 2014 Author Report Share Posted December 13, 2014 Have you even port forwarded? The first post says I forwarded the ports already. Link to comment Share on other sites More sharing options...
rsxownes Posted December 13, 2014 Author Report Share Posted December 13, 2014 I will aks an other Admin, they had the same problem... Ok. Link to comment Share on other sites More sharing options...
Coco-Nuts Posted December 13, 2014 Report Share Posted December 13, 2014 If your server port is 2302 you have to set this : steamPort = 2300;steamQueryPort = 2301; Link to comment Share on other sites More sharing options...
rsxownes Posted December 13, 2014 Author Report Share Posted December 13, 2014 If your server port is 2302 you have to set this : steamPort = 2300;steamQueryPort = 2301; Problem is still the same. Link to comment Share on other sites More sharing options...
cring0 Posted December 13, 2014 Report Share Posted December 13, 2014 Mine, sometimes I can let it sit there looking for it and after like a whole minute or so it will pop up, other times it just doesn't find it at all. Pretty sure we have settings correct. Chalking it up to Steam being poopy. Link to comment Share on other sites More sharing options...
rsxownes Posted December 13, 2014 Author Report Share Posted December 13, 2014 Anyone else have some troubleshooting steps? Kinda pointless when my server is not visible without remoting in. Link to comment Share on other sites More sharing options...
MisterT Posted December 13, 2014 Report Share Posted December 13, 2014 Here is the info. Ports can change if multiple servers. I use port 2602,2603 and 2604 tcp\udp. NO CFG EDITING NEEDED FOR ARMA3 Arma 3 If your Game port is 2302 Than Steam Query is 2303 and 2304 Arrna 2 If your game port us 2302 than Steam Query 2300 and 2301 Port Forwarding. Make sure on your router. You forwarded 2302,2303,2304 to your server local IP Address. Make sure you open TCP and UDP. That's all that needs to be done. Also get your public IP address and use this site to make sure all the ports you opened are open www.canyouseeme.org If your using A3laun and you don't see your server, That's because A3Launcher is shitty app. Until and delete it. Use the new updated Survival Launcher. 2 Reasons for not seeing Server 1. No -port-2302 in startup command line 2. Ports are not open correctly on router and or computer. Simple as that. If it doesn't work after this. Than 1 of the 2 are wrong are setup incorrectly. Link to comment Share on other sites More sharing options...
Skaronator Posted December 14, 2014 Report Share Posted December 14, 2014 Check your Steamport and Steamquery in your config.cfg file. since 1.28 is the query port the gameport +1 so you can't change them via the cfg. Just open port 2302-2305 if your server run at 2302 Link to comment Share on other sites More sharing options...
Coco-Nuts Posted December 14, 2014 Report Share Posted December 14, 2014 Problem is still the same. You have to put online your server during a moment to wait the scan. Link to comment Share on other sites More sharing options...
psych3uk Posted December 14, 2014 Report Share Posted December 14, 2014 If your Server won´t show up after restart check your startup parameters... There must be an-autoinit included This is the solution I'm almost certain; had this exact issue myself and it solved. Link to comment Share on other sites More sharing options...
Snakeyes Posted December 14, 2014 Report Share Posted December 14, 2014 This is the solution I'm almost certain; had this exact issue myself and it solved. Which file does the -autoinit belong in? I have the same problems with my servers. Most of the time they are not visible in the ArmA3 server browser (public list). Link to comment Share on other sites More sharing options...
RC_Robio Posted December 14, 2014 Report Share Posted December 14, 2014 add -autoinit to the end of your launch parameter example: -mod=@Epoch;@EpochHive -config=D:\A3Epoch\SC\config.cfg -ip=yourip -port=2402 -profiles=SC -cfg=D:\A3Epoch\SC\basic.cfg -name=SC -malloc=tbbmalloc -enableHT -autoinit Link to comment Share on other sites More sharing options...
Snakeyes Posted December 14, 2014 Report Share Posted December 14, 2014 Got it. Thanks! :) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now