Jump to content
grave867

[Release] UEP BattlEye Extended Controller Installer

Recommended Posts

my server shut down but never restart it back up.. any reason why? it not executing the restart.bat

It is a known issue, but i believe i have fixed it with an update i just released but i am not sure since I am still at work and can't test it.

Share this post


Link to post
Share on other sites

it doesnt work. the exe just crashed right after installing the BEC but didnt set it up

Ok I will look into this, it is strange though I have no idea why it would crash.... :unsure:  you are actually the first ever to have it crash as well... :unsure:

Share this post


Link to post
Share on other sites

Hey Grave, awesome work!

 

I cant get BEC to work with scheduler or the restart.bat included, and modifying it.

 

BEC appears to simply ignore the cmd to run the restart.bat

 

I have set this as a try and noyhing. It doesnt run.

 

<job id='4'>
<start>000240</start>
<runtime>000000</runtime>
<day>1,2,3,4,5,6,7</day>
<loop>0</loop>
<cmd>C:\PATH\restart.bat</cmd>
<cmdtype>1</cmdtype>
 
           
</job>
 
What a I doing wrong? How can I get BEC to run the bat properly?

Share this post


Link to post
Share on other sites

take a note that the current work dir of the restart script is where your bec is located.
so if you want the current workdir for your bat script to be where its located. you need to set it in the bat script.
from reading the scheduler faq file i saw this,


   4 - Keep in mind that the CWD (Current Work Directory) your bat|cmd script or program will have is the same as your Bec install.
       Let say the path you have your Bec installed is at (C:\Tools\Bec).
       This is and will be the CWD of your script even if its located in C:\Scripts\Myfile.bat or some other place.
       
       Depending on your script and what it does, you might need to set a new work-dir by editing your script with something like:
       ::--------------------
       set NewCWD="C:\Scripts\"
       cd /d %NewCWD%
       
       do stuff
       ::--------------------



this might be confusing for some people, espesially if they edit the script and mix up rel paths with abs pats and dont know the current workdir.
this might be a case where it would fail to run the restart script properly i belive.

Share this post


Link to post
Share on other sites

take a note that the current work dir of the restart script is where your bec is located.

so if you want the current workdir for your bat script to be where its located. you need to set it in the bat script.

from reading the scheduler faq file i saw this,

   4 - Keep in mind that the CWD (Current Work Directory) your bat|cmd script or program will have is the same as your Bec install.

       Let say the path you have your Bec installed is at (C:\Tools\Bec).

       This is and will be the CWD of your script even if its located in C:\Scripts\Myfile.bat or some other place.

       

       Depending on your script and what it does, you might need to set a new work-dir by editing your script with something like:

       ::--------------------

       set NewCWD="C:\Scripts\"

       cd /d %NewCWD%

       

       do stuff

       ::--------------------

this might be confusing for some people, espesially if they edit the script and mix up rel paths with abs pats and dont know the current workdir.

this might be a case where it would fail to run the restart script properly i belive.

You are exactly right, the batch file i provide already has this and the bec is told where to look for the batch. However in the same section of the FAQ is another interest comment, if bec is launched with the --dec argument it won't run external scripts. This may be the cause of the restart now working, I use to tell bec how to launch but was told by the bec creator it was no longer needed. I may re-implement how I use to call bec with specific arguments to see if it fixes the problem. 

 

Thanks again to everyone trying to help fix this problem as bec is critical to all our servers, I have been busy but will try to at least check this page more often  :D

Share this post


Link to post
Share on other sites

Hi,

 

I've got an error when installing. After filling in the details and click "ok" for downloading BEC, about 30 secs later i get this error.

 

 

Problem signature:

  Problem Event Name: CLR20r3
  Problem Signature 01: uep bec installer.exe
  Problem Signature 02: 1.0.0.0
  Problem Signature 03: 54498895
  Problem Signature 04: UEP BEC Installer v1.1
  Problem Signature 05: 1.0.0.0
  Problem Signature 06: 54498895
  Problem Signature 07: 1a
  Problem Signature 08: c
  Problem Signature 09: System.InvalidCastException
  OS Version: 6.1.7601.2.1.0.272.7
  Locale ID: 5129
  Additional Information 1: 0a9e
  Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional Information 3: 0a9e
  Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
 
Read our privacy statement online:
 
If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt
 

 

Small Private Server & Hive

Hardware;

Intel Core i3 @ 3.10ghz

4gb mem

Windows Server 2008 R2 Standard 64bit 

 

Install from directory: C:\Program Files (x86)\Steam\SteamApps\common\Arma 2 Operation Arrowhead

 

Thanks for any help.

Share this post


Link to post
Share on other sites

Hi,

 

I've got an error when installing. After filling in the details and click "ok" for downloading BEC, about 30 secs later i get this error.

 

 

Small Private Server & Hive

Hardware;

Intel Core i3 @ 3.10ghz

4gb mem

Windows Server 2008 R2 Standard 64bit 

 

Install from directory: C:\Program Files (x86)\Steam\SteamApps\common\Arma 2 Operation Arrowhead

 

Thanks for any help.

This caused by your .net framework not working correctly, since the installer itself is programmed in .net. You should look at forums using this as a search "Problem Event Name: CLR20r3" to try and fix the issue. 

Share this post


Link to post
Share on other sites

take a note that the current work dir of the restart script is where your bec is located.

so if you want the current workdir for your bat script to be where its located. you need to set it in the bat script.

from reading the scheduler faq file i saw this,

   4 - Keep in mind that the CWD (Current Work Directory) your bat|cmd script or program will have is the same as your Bec install.

       Let say the path you have your Bec installed is at (C:\Tools\Bec).

       This is and will be the CWD of your script even if its located in C:\Scripts\Myfile.bat or some other place.

       

       Depending on your script and what it does, you might need to set a new work-dir by editing your script with something like:

       ::--------------------

       set NewCWD="C:\Scripts\"

       cd /d %NewCWD%

       

       do stuff

       ::--------------------

this might be confusing for some people, espesially if they edit the script and mix up rel paths with abs pats and dont know the current workdir.

this might be a case where it would fail to run the restart script properly i belive.

This fixed my problem. Thanks

Share this post


Link to post
Share on other sites

*** V 1.603 ***
- Fixed: A bug when the time in the scheduler was set to 24:00:00 instead of 00:00:00
- FIxed: A Bug in Commands.xml file. if _name_ or _time_ was not set for the ban commands, no reason was given.

*** V 1.602 ***
- Improved: Auto remove starting and ending spaces from the tags in the xml files.
- Fixed: A typo in the code making WhiteListKickMsg not work unless it was spelled wrong.
- Added: New setting to [Misc] -> BeCustomBanFiles, define custom banfiles which will do a (loadbans file) if the file(s) gets changed.
- Added: Logging to BeLog-DATE.log, into about guid verification on player connect when using Bec Reporter. (Status report)
- Changed: SlotLimit chaned a bit again :\


*** V 1.601 ***
- Added: If the -f switch is forgotten, Bec will try and look for the file "Config.cfg" in the Config directory and use that one if it exists.
- Added: When loading plugins, Bec will display its version if the variable: __version__ is defined in the plugin __init__.py file
- Added: fortune as a command for the scheduler. <cmd>fortune</cmd>. will announce a random line from Config\fortune.txt
- ReAdded: A timeout of 3 sec is added before Bec.exe closes on startup errors, Ie missing "Config.cfg" etc..
- Improved: will automatically generate the __init__.py file in the Plugins directory if missing. (does not apply subdir), but will only do so if the directory exists and no --dpl used.
- Fixed: A encoding error that could happen when reading the scheduler file and doing jobs with none ascii. its to prevent spamming up the error.log unnecessary.
- Changed: SlotLimit changed to a more static method. number of reserved slots will no longer depend on admins online but the size of your admin file
- Misc: Plugins cleanup, and minor changes to them, a little updated docs etc,
        Plugins are not included in the Bec.zip file any more, but can instead be downloaded separately

Share this post


Link to post
Share on other sites

So I downloaded this and started it up and filled out all of the fields, once it finishes and passes the prompt to start downloading BEC the window disappears and nothing else happens. I don't get the clean up and config prompt that is shown in the video. There is no error message or anything, there is just a small amount of network activity when I click ok on the download prompt. In the instance 11 battle eye folder it creates the BEC folder and inside is the zipped BEC folder. Any ideas?

Share this post


Link to post
Share on other sites

When the download window disappears it means that the installer is downloading the BEC.zip from the official website. It is a slow download as it is, but the download can be slowed by the load on the official BEC server or load on your connection. The zip folder is created as the full file is downloaded as a place holder and it will say the full expected file size as well. The installer isn't finished and it hasn't errored out it is simply taking a while to download the file for one reason or another.  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

    • By Thug
      UPDATE 2/21/2018
      Just wanted to show where I was with the launcher I have been working on. I have a friend Kevin Phillips that has bee helping me work on this project. 
      Made a short video on youtube and wanted to share.
      Click here to see the video on youtube.
      Please let me know what you think.
      Thug
      TBsGaming
       
      ----------------------------------------OLD POST BELOW-----------------------------------------------------------------------------------------------------------
      Hope I am posting in correct location. If not please tell me where I can post.
      What I am posting is possible because of many resources on the internet. A lot information was learned on http://stackoverflow.com/
      Thank you to TheDuke for giving me one of his start bat files.
      Thank you to all the unknown that contributed over the years on different sites.
      This is something I have been working on for the last two weeks. It is still a work in progress.
      What it is, simply an admin launcher. I found that if I deal with more than two server this helps a lot. Plus it was something to do lol. 
      So here we go: FIRST MAKE A FOLDER CALLED SERVERS OR CALL IT WHAT EVER YOU WANT. the files we will be making will go into that folder
      We will make a bat file for origins 1.9.7.5 dayzoverwatch  dayz_epoch
      First thing lets make that bat file.
      If I were you I would use Notepad++  What a great program
      Open a new doc and save as origins_opoch_Chernarus.bat or what ever name you want BUT IT MUST HAVE .bat at the end
      Copy the following and paste it in the new file you just make called  origins_opoch_Chernarus.bat
      ===========================================================================
      EDITED ON 12/31/2016 01/17/2017
      QUESTION:   .bat file is updated with password settings
      Lets say I have a server. That server has a password. The password is dog
      How would I add the password to the bat file?  
      Right now if I try to join a server with a password it will say, you enter the wrong pass word.
      Then I go to multiplayer and select the server and enter the password dog and I am in.
      The .bat file is right below this
      ============================================================================
       
       
      Now make a file and name it bat_test.hta or what ever you want. Copy and paste the following in it and save to the folder SERVERS
      What I did at this point was made a shortcut of the dat_test.hta to my desktop after that double chick it and it should work. Did for me. 
      as you can see I left some of my information in so you could try it out.
      OF COURSE THE LINE <p><a href="E:/BAT START FILES/origins_opoch_Chernarus.bat">Origins Overwatch Epoch Chernarus</a></p> points to where I have my folder
      YOU WILL NEED TO CHANGE THE LOCATION OF THE BAT FILE TO WHERE EVER YOU PUT THE FOLDER CALLED SERVERS.
      Like I said this is a work in progress. If you have anything you would like to  share, that would be great.

    • By Donnovan
      14 FEBRUARY 2018 - INSTALLATION INSTRUCTIONS UPDATED (REMOTE EXEC WHITE LIST)!
      04 FEBRUARY 2018 - WE ARE ON v002!
      Thanks to the Discord pals for helping in tailore BRPVP Zombies to Epoch.
       
      Hi:
      My name is Donnovan and i bring here the BRPVP Zombies for Epoch Mod.
      (You can know more about BRPVP here: http://www.brpvp.com)
      BRPVP Zombies are made of: code, +code, some few images and sounds.



      Here the files v002 (size 432Kb):
      4 February 2018 - https://drive.google.com/file/d/1ANHL_SaFdKlJOLrDV6CakOD7HTNwVr4T/view?usp=sharing
       
      License:
      http://creativecommons.org/licenses/by/4.0/
      You must use the words "BRPVP zombies" or "BRPVP-Z" in your server name and give proper credits to the Author (Andre Luis AKA Donnovan).
       
      BRPVP Zombies was done completelly stand alone, but with Epoch in mind.
       
      BE Filters Info:
      1 - The variables set on zombies and target, with setVariable, have the prefix "brpvp_", for easy BE Filter management.
      2 - BRPVP Zombies make use of 3 public variables, the variable names start with "BRPVP_" for easy BE Filters management.
       
      Remote Exec White List:
      You need that in your description.ext:
      class CfgRemoteExec { class Functions { mode = 1; jip = 0; class BRPVP_remoteExec { allowedTargets = 0; jip = 1; }; }; }; If you already have a class CfgRemoteExec {...}; declaration in your description.ext you will need to merge the above with the one you have.
       
      Custom Epoch "FiredMan" Event Handler:
      Get the code inside player addEventHandler ["FiredMan",{...this code...}]; in the file brpvp_zombies_stuff_client.sqf and put it in the Epoch file EPOCH_custom_EH_FiredMan.sqf (see https://github.com/EpochModTeam/Epoch/blob/release/Sources/epoch_code/customs/EPOCH_custom_EH_FiredMan.sqf).
       
      description.ext file:
      BRPVP Zombies have some sound declarations in description.ext. You will need to merge it with your description.ext.
       
      Gameplay:
      BRPVP Zombies add two types of zombies:
      1 - Fixed zombies in infected cities: they stay on some cities and can be triggered from near or from far, with your proximity or with bullet hit.
      Here the configuration for fixed zombies and infected cities:
      //FIXED ZOMBIES ON DEDICATED SERVER BRPVP_fixedZombiesAmount = [ [[1],[10],35,["NameVillage"]], [[1],[10],35,["NameVillage"]], [[1],[10],35,["NameVillage"]], [[1],[10],35,["NameVillage"]], [[2],[15],40,["NameVillage"]], [[2],[15],40,["NameVillage"]], [[2,3],[40,60],100,["NameCity","NameVillage"]], [[4,5],[120,160],150,["NameCityCapital","NameCity"]] ]; BRPVP_fixedZombiesReviveTime = 1800; //SECONDS TO A FIXED ZOMBIE TO REVIVE, THEY ONLY REVIVE IF THERE IS NO PLAYER NEAR Reading above, you will have 8 infected cities on your mission.
      Explaning line 7: [[2,3],[40,60],100,["NameCity","NameVillage"]]
      Zombies will have its force random selected from 2 or 3, they will be in number of 40 if force is 2 and will be in number of 60 if force is 3. The spawn radius in the city will be 100 meters, and the city selected for those zombies will be randonly picked from the list of Cities and Villages provided by the map.
      2 - Context spawned zombies: those zombies will spawn when you are in places with near houses or buildings. You can avoid those zombies to spawn by obscuring your self like walking near walls, entering in houses, going crouch or prone, stay high from the ground, stay near big objects like wreck cars and all kind of objects or group of objects that can block the perception of you.
       
      Configuration:
      All the BRPVP Zombies configurations can be found in this file: brpvp_zombies_config.sqf.
       
      Older files:
      v001: https://drive.google.com/file/d/1Q4cavJQdqwxcz-O6DBFo_fKfEG-_g8bj/view?usp=sharing
    • By Thug
      When I send a group invite, the players join, great.  Then you get all this radio chatter and speech text telling you to regroup, heli 1500m out, and BS BS BS . How do I turn off the radio chatter and the speech text?
    • By nathan9117
      Hi there, I would like to move this file to my server pbo.
       I have moved it to my mission pbo and tested by changing the call to this and it spawns fine.
      For some reason however I can not get it to spawn if it is placed server side and executed from server_functions.sqf either using [] execVm, execVm or call compile preprocessFileLineNumbers.
      The main reason for wanting to move this file is that when I edit my map I dont want to place any objects over existing ones. If it is not going to be possible then an alternative will be to load the buildings in the 3d editor make my map and just remove the duplicates that already spawn/exist in chernarus11.sqf 
      Contents of chernarus11.sqf below extracted from dayz_code.
      Thanks in advance ! 
       
    • By xTimeToShine
      Hey guys,
      i'm proud to present our new "Epic Illusion Gaming - DayZ Overpoch server".
       
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       
      [EIG] DayZ Overpoch | Chernarus | 1.0.6.2 | Coins | Lift | Groups | Missions | Events | Deploy Bike |
      IP: 94.250.209.139:2302
       
      We are searching for some Players and also for some Admins. Please visit our Server or come to our Teamspeak or Discrod.
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
       
      Visit us on ...
      ...Teamspeak:  94.250.223.10:15111
      ...Discord:  https://discord.gg/MTQuUHP
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Our new special features:
      Global Coins System Deploy a bike (Toolbox) Lift & Tow Selfbloodbagging Groupsystem Virtual Garage AI Missions Special PVP Events Custom Loadout ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Upcoming features:
      Weaponswitch Enhanced Spawn Selection and much more...  
  • Advertisement
  • Donation Box

    Please donate to support the community.
    We appreciate all donations!
  • Advertisement
  • Supporters
  • Latest Donations

  • Advertisement
  • Discord

×